370B Backhoe Compatibility with 3038E 2016 Model (2nd Gen)

D

Denis Griffin

New member
Has anyone successfully mounted a 370B Backhoe on a 2016 model? I’ve been digging through the specs, and while I know the 2016 is part of the 2nd generation (2013–present), I can't confirm if the sub-frame mounting kit is compatible. My local dealer was surprisingly clueless about this setup.
Just wondering if anyone here has managed to make it work? Thanks!
 
I’m in the same boat, actually. I’ve been looking at a used 370B for my 2016 3032E, and the documentation is surprisingly blurry. Most charts stop at 2015 or just say '2013-current' without specifying the sub-frame SKU.
Denis, did your dealer check the compatibility via the Parts Advisor tool or just looked at the old printed manuals? Sometimes the newer mounting kits don't show up in the older books.
 
I remember reading a thread about this. If I recall correctly, the 370B is basically an updated 370A, so the frame geometry should be identical for the 2016 models.
The real issue is usually the Power Beyond kit. Even if you get the sub-frame bolted on, you can't run the backhoe without the rear hydraulic diverted. Does your tractor already have the PB kit installed?
 
Alright, let's clear up the confusion. I just double-checked the official attachment compatibility matrix for the 2nd Gen 3-series.
For a 2016 model, the 370B is a 100% match. You need the sub-frame kit BLV11015. This specific kit was released to bridge the gap for the 2013+ frames that had the reinforced transmission housings.
A few things to note for the install:
1. You MUST have the Power Beyond kit (BLV10589 or similar depending on your exact tractor SKU).
2. The 370B uses a different set of pins than the older 270 series, so make sure they are included with the backhoe.
3. Your dealer probably didn't see it because it's listed under 'Current Attachments' rather than the legacy parts for the 2016 year model.
Go back to them with that part number (BLV11015) and they should be able to order it for you.
 
You must log in or register to reply here.
Back
Top Bottom