Shibaura SF1040T

Shibaura SF1040TThe Shibaura SF1040T is a 4WD utility tractor manufactured by Shibaura in Matsumoto, Japan. The Shibaura SF1040T is equipped with a 0.3 L (17.0 cu·in) four-cylinder diesel engine and a constant mesh transmission with 16 forward and 4 reverse gears.

The Shibaura SF1040T utility tractor used the Shibaura LER1104T engine. It is a 4.6 L, 4,560 cm2, (278.3 cu·in) four-cylinder turbocharged diesel engine with 110.0 mm (4.33 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 106.5 PS (78.3 kW; 105.0 HP) at 2,200 rpm of output power.

The Shibaura SF1040T is equipped with hydrostatic power steering, mechanical wet disc brakes, an open operator station or two-post ROPS, and 100.0 liters (26.4 US gal.; 22 Imp. gal) fuel tank.

Shibaura SF1040T Specifications

General Specifications
Model Shibaura SF1040T
Length 4,080 mm (160.6 in)
Width 1,870 mm (73.6 in)
Height 2,740 mm (107.9 in)
Wheel base
Weight 3,590 kg (7,915 lbs)
Fuel tank capacity 100.0 liters (26.4 US gal.; 22 Imp. gal)
Battery 12V, 170Ah
Cabin type Open operator station or two-post ROPS
Engine model Shibaura LER1104T
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.6 L, 4,560 cm2, (278.3 cu·in)
Bore and stroke 110.0 mm X 120.0 mm (4.33 in X 4.72 in)
Compression ratio 17.0:1
Horsepower 106.5 PS (78.3 kW; 105.0 HP) at 2,200 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Mechanical wet disc
Transmission model
Transmission type Constant mesh with dry disc clutch
Gears 16 forward and 4 reverse
Front tires Ag: 12.4-24
Rear tires Ag: 18.4-34
Three-Point Hitch
Category II
Control type Position and draft control
Lift capacity (at ends) 2,500 kg (5,515 lbs)
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 25.0 L (6.6 US. gal, 5.5 Imp. gal.)
Pressure 2900 psi (199.9 bar)
Pump flow 9.3 gpm (35.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.