Shibaura ST445

Shibaura ST445The Shibaura ST445 is a 4WD comtact utility tractor manufactured by japanese company Shibaura. The Shibaura ST445 is equipped with 2.2 L four-cylinder diesel engine and synchromesh transmission (12 forward and 12 reverse gears) with single disc dry type clutch.

The Shibaura ST445 utility tractor used the Shibaura N844L engine. 2.2 L, 2,216 cm2, (135.2 cu·in) four-cylinder diesel engine with 84.0 mm (3.31 in) of cylinder bore and 100.0 mm (3.94 in) of piston stroke. The compression ratio rating is 22.5:1. This engine produced 45.7 PS (33.6 kW; 45.0 HP) at 2,600 rpm of maximum output power.

The Shibaura ST445 is equipped with full hydraulic power steering, wet-type disc brakes, open operator station with ROPS and 39.0 liters (10.3 US gal.; 8.6 Imp. gal) fuel tank.

Shibaura ST445 Specifications

General Specifications
Model Shibaura ST445
Length 3210 mm (126.4 in)
Width 2,470 mm (97.2 in)
Height 1,640 mm (64.6 in)
Wheel base 1,765 mm (69.5 in)
Weight 1,510 kg (3,329 lbs)
Fuel tank capacity 39.0 liters (10.3 US gal.; 8.6 Imp. gal)
Battery 12V 64A
Cabin type Open operator station with ROPS
Engine model Shibaura N844L
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.2 L, 2,216 cm2, (135.2 cu·in)
Bore and stroke 84.0 mm X 100.0 mm (3.31 in X 3.94 in)
Compression ratio 22.5:1
Horsepower 45.7 PS (33.6 kW; 45.0 HP) at 2,600 rpm
Starter Electric
Oil capacity: 6.0 L (6.34 US. qt, 5.28 Imp. qt.)
Coolant capacity: 5.6 L (5.92 US. qt, 4.93 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Full hydraulic power
Brakes Wet type disc
Transmission model
Transmission type Synchromesh with dry disc clutch
Gears 12 forward and 12 reverse
Speed Forward: 26.4 kmh (16.4 mph) Reverse: 29.6 (18.4 mph)
Transmission oil capacity 36.0 L (38.04 US. qt, 31.68 Imp. qt.)
Front tires Ag: 8-16; Lawn/turf: 27×8.5-15
Rear tires Ag: 14.9-24; Lawn/turf: 18.4-16.1
Three-Point Hitch
Caterogy I
Control type
Lift capacity
PTO (Power take-off shaft)
Rear PTO type Independent with multi-discs wet type clutch
Rear PTO spped 540/791 rpm
Hydraulic system
Hydraulic type
Valves 1
Pump flow 9.8 gpm (37.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.