International Harvester 560

International Harvester 560The International Harvester 560 is a 2WD standard-tread tractor manufactured by International Harvester from 1958 to 1963.

The International Harvester 560 is equipped with one of two engines: a 4.6 L (281.3 cu·in) six-cylinder diesel engine or a 4.3 L (263.0 cu·in) six-cylinder gasolineLP-gas engine and one of two transmissions: a sliding gear transmission with 5 forward and 1 reverse gear or a partial power shift (Torque Amplifier) transmission with 10 forward and 2 reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester D282. It is a 4.6 L, 4,609 cm2, (281.3 cu·in) six-cylinder natural aspirated diesel engine with 94.0 mm (3.7 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke. The compression ratio rating is 18.2:1. This engine produced 73.6 PS (54.1 kW; 72.5 HP) at 1,800 rpm of output power and 295.6 N·m (30.1 kg·m, 217.9 ft·lb) at 1,400 rpm of torque.
  • International Harvester C263. It is a 4.3 L, 4,310 cm2, (263.0 cu·in) six-cylinder natural aspirated gasoline / LP-gas engine. The cylinder bore is 90.0 mm (3.54 in) and the piston stroke is 112.0 mm (4.41 in). The compression ratio rating is 7.2:1 for the gasoline version and 8.7:1 for the LP-gas version. This engine produced 73.6 PS (54.1 kW; 72.5 HP) at 1,800 rpm of output power and 295.6 N·m (30.1 kg·m, 217.9 ft·lb) at 1,050 rpm of toque for gasoline version and 287.5 Nm (29.3 kg·m; 212.2 ft·lb) at 1,100 rpm for LP-gas engine.

The IH 560 is equipped with manual or hydrostatic power (optional) steering, independent mechanical disc brakes, Open operator station and 125.0 liters (33.0 US gal.; 27.5 Imp. gal) fuel tank for gasoline and diesel fuel or 140.0 liters (37.0 US gal, 30.8 Imp. gal) for LP-gas.

International Harvester 560 Specifications

General Specifications
ModelInternational Harvester 560
Length3,700 mm (145.7 in)
Width2,180 mm (85.8 in)
Height2,180 mm (85.8 in)
Wheel base2,170 mm (85.4 in)
Weight Gasoline: 2,975 kg (6,560 lbs)
Diesel: 3,080 kg (6,785 lbs)
Fuel tank capacity Gas/Diesel: 125.0 liters (33 US gal.; 27.5 Imp. gal)
LP-gas: 140.0 liters (37 US gal.; 30.8 Imp. gal)
BatteryOne 12V (gasoline), two 6V (diesel)
Cabin typeOpen operator station
Engine
Engine modelInternational Harvester D282
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement4.6 L, 4,609 cm2, (281.3 cu·in)
Bore and stroke94.0 mm X 112.0 mm (3.7 in X 4.41 in)
Compression ratio18.2:1
Horsepower73.6 PS (54.1 kW; 72.5 HP) at 1,800 rpm
Torque295.6 N·m (30.1 kg·m, 217.9 ft·lb) at 1,400 rpm
StarterElectric
Oil capacity:8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity:21.9 L (23.1 US. qt, 19.3 Imp. qt.)
Engine
Engine modelInternational Harvester C263
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeGasoline
Displacement4.3 L, 4,310 cm2, (263.0 cu·in)
Bore and stroke90.0 mm X 112.0 mm (3.54 in X 4.41 in)
Compression ratio7.2:1, 8.7
Horsepower73.6 PS (54.1 kW; 72.5 HP) at 1,800 rpm
Torque Gasoline: 295.6 N·m (30.1 kg·m, 217.9 ft·lb) at 1,050 rpm
LP-gas: 287.5 N·m (29.3 kg·m; 212.2 ft·lb) at 1,100 rpm
StarterElectric
Oil capacity:8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: Gasoline: 18.5 L (19.5 US. qt, 16.3 Imp. qt.)
LP-gas: 19.0 L (20.0 US. qt, 16.7 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeManual or hydrostatic power (optional)
BrakesIndependent mechanical disc
Transmission model
Transmission typeSliding gear
Gears5 forward and 1 reverse
Speed Forward: 26.0 kmh (16.2 mph) Reverse: 4.4 (2.7 mph)
Transmission oil capacity60.6 L (16 US. gal, 13.3 Imp. gal.)
Transmission modelTorque Amplifier
Transmission typePartial power shift
Gears10 forward and 2 reverse
Speed Forward: 26.0 kmh (16.2 mph) Reverse: 4.4 (2.7 mph)
Transmission oil capacity60.6 L (16 US. gal, 13.3 Imp. gal.)
Tires
Front tiresAg: 6.50-18
Rear tiresAg: 16.9/14-30
Rear Hitch
TypeIH Fast Hitch
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity60.6 L (64.04 US. qt, 53.32 Imp. qt.)
Valves1 to 3
Pump flow 12.0 gpm (45.4 lpm)
17.0 gpm (64.4 lpm)
Steering flow2.5 gpm (9.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*