John Deere 4010

John Deere 4010The John Deere 4010 is a 4WD compact utility tractor from the 4000 Ten Compact series. This tractor was manufactured by the Yanmar for John Deere in Japan from 2002 to 2005. The John Deere 4010 is equipped with a 0.8 L three-cylinder diesel engine and hydrostatic type transmission with infinite (2-range) forward and reverse gears.

The JD 4010 compact utility tractor used the Yanmar 3TNE68 engine. It is a 0.8 L, 784 cm2, (47.8 cu·in) three-cylinder natural aspirated diesel engine with 68.0 mm (2.68 in) of the cylinder bore and 72.0 mm (2.83 in) of the piston stroke. This engine produced 18.8 PS (13.8 kW; 18.5 HP) at 3,000 rpm of maximum output power.

The John Deere 4010 is equipped with hydrostatic power steering, wet disc brakes, open operator station with two-post ROPS and 13.0 liters (3.4 US gal.; 2.9 Imp. gal) fuel tank.

Following attachments are available for JD 4010 compact utility tractor:

  • John Deere mid-mount 54 in (1,370 mm) mower deck with 3-blades
  • John Deere mid-mount 60 in (1,520 mm) mower deck with 3-blades
  • John Deere 410 loader

John Deere 4010 Specifications

General Specifications
ModelJohn Deere 4010
Length2,590 mm (102 in)
Width1,130 mm (44.5 in)
Height1,990 mm (78.3 in)
Wheel base1,450 mm (57.1 in)
Weight644 kg (1420 lbs)
Fuel tank capacity13.0 liters (3.4 US gal.; 2.9 Imp. gal)
Battery12V CCA: 435A
Cabin typeOpen operator station with two-post ROPS
Engine modelYanmar 3TNE68
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement0.8 L, 784 cm2, (47.8 cu·in)
Bore and stroke68.0 mm X 72.0 mm (2.68 in X 2.83 in)
Horsepower18.8 PS (13.8 kW; 18.5 HP) at 3,000 rpm
Oil capacity:2.0 L (2.11 US. qt, 1.76 Imp. qt.)
Coolant capacity:2.4 L (2.54 US. qt, 2.11 Imp. qt.)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesWet disc
Transmission model
Transmission typeHydrostatic type
GearsInfinite (2-range) forward and reverse
Speed Forward: 13.2 kmh (8.2 mph) Reverse: 13.2 (8.2 mph)
Transmission oil capacity9.8 L (10.36 US. qt, 8.62 Imp. qt.)
Front tires Ag: 6-12
Lawn/turf: 22×9.00-12
Industrial: 5.70-12
Rear tires Ag: 8-16
Lawn/turf: 29×12.50-15
Industrial: 10-16.5
Three-Point Hitch
Control type
Lift capacity390 kg (860 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO spped540 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity9.8 L (10.36 US. qt, 8.62 Imp. qt.)
Total flow2.6 gpm (9.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.