The John Deere 6145M is a 2WD/4WD row-crop tractor from the 6M series. This tractor has been manufactured by John Deere in Mannheim, Baden-Württemberg, Germany since 2015. This first generation was manufactured form 2015 to 2020. The John Deere 6145M is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of three transmissions variants.
The JD 6145M row-crop tractor used the John Deere PowerTech PSS engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged aftercooled diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 147.0 PS (108.1 kW; 145.0 HP) at 2,100 rpm of output power.
The John Deere 6145M is equipped with power steering, hydraulic wet disc brakes, cab (standard) with air-conditoning or two-post folding ROPS available and 264.9 liters (70 US gal.; 58.3 Imp. gal) fuel tank.
John Deere 6145M Specifications
| General Specifications | |
| Model | John Deere 6145M |
| Length | 4,720 mm (185.8 in) |
| Width | 2,550 mm (100.4 in) |
| Height | ROPS: 2,870 mm (113 in) Cab: 2,870 mm (113 in) |
| Wheel base | 2,760 mm (108.7 in) |
| Ground clearance (front axle) | 600 mm (23.6 in) |
| Weight (shipping) | 5,530 kg (12,192 lbs) |
| Fuel tank capacity | 264.9 liters (70 US gal.; 58.3 Imp. gal) |
| Battery | 12V |
| Cabin type | Cab (standard) with air-conditoning or two-post folding ROPS available |
| Engine | |
| Engine model | John Deere PowerTech PSS |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
| Bore and stroke | 105.0 mm X 127.0 mm (4.13 in X 5 in) |
| Horsepower | 147.0 PS (108.1 kW; 145.0 HP) at 2,100 rpm |
| Starter | Electric |
| Coolant capacity: | 27.0 L (28.5 US. qt, 23.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Final drive | Inboard planetary |
| Differential lock | Electro-hydraulic front and rear |
| Transmission model | PowrQuad |
| Transmission type | Four-speed power shift with wet disc clutch |
| Gears | 16 forward and 16 reverse |
| Speed | Forward: 30.1 kmh (18.7 mph) Reverse: 31.3 kmh (19.5 mph) |
| Transmission model | PowrQuad |
| Transmission type | Four-speed power shift with wet disc clutch |
| Gears | 24 forward and 24 reverse |
| Speed | Forward: 37.5 kmh (23.3 mph) Reverse: 39.1 kmh (24.3 mph) |
| Transmission model | AutoQuad PLUS |
| Transmission type | Four-speed power shift with wet disc clutch |
| Gears | 24 forward and 24 reverse |
| Speed | Forward: 37.5 kmh (23.3 mph) Reverse: 39.1 kmh (24.3 mph) |
| Tires | |
| Front tires | Ag: 10.00-16 (2WD), 380/85R28 (4WD) |
| Rear tires | Ag: 460/85R38 |
| Three-Point Hitch | |
| Category | IIIN/II |
| Control type | Electronic lower-link draft sensing |
| Lift capacity | 3,835 kg (8,456 lbs) Optional: 4,330 kg (9,546 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO speed | 540/1000 (1.375) or 540 |
| Hydraulic system | |
| Hydraulic type | Open center or closed-center pressure-and-flow compensated load sensing |
| Hydraulic capacity | 2900 L (766.1 US. gal, 637.9 Imp. gal.) |
| Valves | Rear: 3 Mid: 3 |
| Pump flow | 21.1 gpm (79.9 lpm) Optional: 30.0 gpm (113.6 lpm) |
| SCV flow | 21.1 gpm (79.9 lpm) |
Be the first to comment