The Farmall 350 is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) in Rock Island, Illinois, USA from 1956 to 1958.
The Farmall 350 is equipped with one of two engines: a 3.2 L (193.0 cu·in) four-cylinder diesel engine or a 2.9 L (175.0 cu·in) four-cylinder gasoline/LP-gas engine and one of two transmissions: a sliding gear with dry disc clutch transmission with 5 forward and 1 reverse gears or a two-speed power shift with dry disc clutch transmission with 10 forward and 2 reverse gears.
The tractor could be equipped with the following engines:
- Continental D193. It is a 3.2 L, 3,163 cm2, (193.0 cu·in) four-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 111.0 mm (4.37 in) of the piston stroke. The compression ratio rating is 16.87:1. This engine produced 0 PS ( kW; 0 HP) at rpm of output power.
- International Harvester C175. It is a 2.9 L, 2,868 cm2, (175.0 cu·in) four-cylinder natural aspirated gasoline/LP-gas engine. The cylinder bore is 92.0 mm (3.62 in) and the piston stroke is 108.0 mm (4.25 in). The compression ratio rating is 7.0:1 for gasoline version or 9.0:1 for LP-gas version.
The Farmall 350 is equipped with manual or power (optional) steering, open operator station, and 64.3 liters (17 US gal.; 14.1 Imp. gal) fuel tank for gasoline version, 68.1 liters (18.0 US gal, 15.0 Imp. gal) for diesel version or 69.6 liters (18.4 US gal, 15.3 Imp. gal) for LP-gas version.
Farmall 350 Specifications
| General Specifications | |
| Model | Farmall 350 |
| Length | 3,450 mm (135.8 in) |
| Width | 2,100 mm (82.7 in) |
| Height (steering wheel) | 1,960 mm (77.2 in) |
| Wheel base | 2,340 mm (92.1 in) |
| Ground clearance | 480 mm (18.9 in) |
| Weight | – |
| Fuel tank capacity |
Gasoline: 64.3 liters (17.0 US gal.; 14.1 Imp. gal) Diesel: 68.1 liters (18.0 US gal.; 15.0 Imp. gal) LP-gas: 69.6 liters (18.4 US gal.; 15.3 Imp. gal) |
| Battery | – |
| Cabin type | Open operator station. |
| Engine | |
| Engine model | Continental D193 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 3.2 L, 3,163 cm2, (193.0 cu·in) |
| Bore and stroke | 95.0 mm X 111.0 mm (3.74 in X 4.37 in) |
| Compression ratio | 16.87:1 |
| Horsepower | – |
| Starter | Electric |
| Coolant capacity: | 16.3 L (17.2 US. qt, 14.3 Imp. qt.) |
| Engine | |
| Engine model | International Harvester C175 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Gasoline/LP-gas |
| Displacement | 2.9 L, 2,868 cm2, (175.0 cu·in) |
| Bore and stroke | 92.0 mm X 108.0 mm (3.62 in X 4.25 in) |
| Compression ratio |
Gasoline: 7.0:1 LP-gas: 9.0:1 |
| Horsepower | – |
| Starter | Electric |
| Coolant capacity: | 18.0 L (19 US. qt, 15.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual or power (optional) |
| Brakes | – |
| Transmission model | – |
| Transmission type | Sliding gear with dry disc clutch |
| Gears | 5 forward and 1 reverse |
| Speed | Forward: 25.9 kmh (16.1 mph) Reverse: 5.0 kmh (3.1 mph) |
| Transmission model | Torque Amplifier |
| Transmission type | Two-speed power shift with dry disc clutch |
| Gears | 10 forward and 2 reverse |
| Speed | Forward: 25.9 kmh (16.1 mph) Reverse: 5.0 kmh (3.1 mph) |
| Tires | |
| Front tires | Ag: 5.50-16 |
| Rear tires | Ag: 11.00×38, 13.6×38 |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
Be the first to comment