Ford 2600

Ford 2600The Ford 2600 is a 2WD (two-wheel drive) utility tractor manufactured by Ford from 1975 to 1981.

The Ford 2600 is equipped with one of two engines: a 2.6 L (158.0 cu·in) three-cylinder diesel engine or a 2.6 L (158.0 cu·in) three-cylinder gasoline engine and one of three transmission variants. Both engines were manufactured by Ford.

The tractor could be equipped with the following engines:

  • Ford. It is a 2.6 L, 2,589 cm2, (158.0 cu·in) three-cylinder natural aspirated diesel engine with 107.0 mm (4.21 in) of the cylinder bore and 97.0 mm (3.82 in) of the piston stroke. The compression ratio rating is 17.3:1. This engine produced 37 PS (27.2 kW; 36.5 HP) at 2,000 rpm of output power.
  • Ford. It is a 2.6 L, 2,589 cm2, (158.0 cu·in) three-cylinder natural aspirated gasoline engine. The cylinder bore is 107.0 mm (4.21 in) and the piston stroke is 97.0 mm (3.82 in). The compression ratio rating is 7.75:1. This engine produced 36 PS (26.5 kW; 35.5 HP) at 2,000 rpm of output power.

The Ford 2600 is equipped with manual or power (option) steering, differential mechanical expanding shoe brakes, open operator station or two-post ROPS (optional), and 49.2 liters (13 US gal.; 10.8 Imp. gal) fuel tank.

Ford 2600 Specifications

General Specifications
Model Ford 2600
Length 3,210 mm (126.4 in)
Width 1,320 mm (52 in)
Height (hood) 1,330 mm (52.4 in)
Wheel base 1,920 mm (75.6 in)
Weight 1,640 kg (3,616 lbs)
Fuel tank capacity 49.2 liters (13 US gal.; 10.8 Imp. gal)
Battery 12, Gas: 77Ah; Diesel: 128Ah
Cabin type Open operator station or two-post ROPS (optional)
Engine
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.6 L, 2,589 cm2, (158.0 cu·in)
Bore and stroke 107.0 mm X 97.0 mm (4.21 in X 3.82 in)
Compression ratio 17.3:1
Horsepower 37 PS (27.2 kW; 36.5 HP) at 2,000 rpm
Torque 137.0 N·m (14 kg·m, 101 ft·lb) at 1,400 rpm
Starter Electric
Oil capacity: 6.6 L (7 US. qt, 5.8 Imp. qt.)
Coolant capacity: 10.4 L (11 US. qt, 9.2 Imp. qt.)
Engine
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Gasoline
Displacement 2.6 L, 2,589 cm2, (158.0 cu·in)
Bore and stroke 107.0 mm X 97.0 mm (4.21 in X 3.82 in)
Compression ratio 7.75:1
Horsepower 36.0 PS (26.5 kW; 35.5 HP) at 2,000 rpm
Torque 137.0 N·m (14 kg·m, 101 ft·lb) at 1,350 rpm
Starter Electric
Oil capacity: 6.6 L (7 US. qt, 5.8 Imp. qt.)
Coolant capacity: 10.4 L (11 US. qt, 9.2 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual or power (option)
Brakes Differential mechanical expanding shoe
Differential lock Mechanical rear
Transmission model
Transmission type
Gears 6 forward and 4 reverse
Transmission model
Transmission type Gear type
Gears 6 forward and 2 reverse
Speed Forward: 28.0 kmh (17.4 mph) Reverse: 11.3 (7 mph)
Transmission oil capacity 13.1 L (3.5 US. gal, 2.9 Imp. gal.)
Transmission model Dual-Range
Transmission type
Gears 8 forward and 2 reverse
Speed Forward: 28.0 kmh (17.4 mph) Reverse: 13.5 (8.4 mph)
Transmission oil capacity 13.1 L (3.5 US. gal, 2.9 Imp. gal.)
Tires
Front tires Ag: 5.50-16
Rear tires Ag: 12.4-28
Three-Point Hitch
Category I
Control type Top-link draft sensing
Lift capacity (at ends) 895 kg (1,975 lbs)
PTO (Power take-off shaft)
Rear PTO type Transmission or live (optional)
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity 23.3 L (6.2 US. gal, 5.1 Imp. gal.)
Pressure 2100 psi (144.8 bar)
Pump flow 8.5 gpm (32.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*