Ford 8830

Ford 8830The Ford 8830 is a 2WD or 4WD row-crop tractor from the 8030 series. This tractor was manufactured by Ford in Antwerp, Belgium from 1990 to 1993. The Ford 8830 is equipped with a 6.6 L (401.0 cu·in) six-cylinder diesel engine and one of two transmissions: a Funk Ultra Command transmission with 18 forward and 9 reverse gears or a Dual Power constant mesh transmission with 16 forward and 4 reverse gears.

The Ford 8830 row-crop tractor used the Ford engine. It is a 6.6 L, 6,571 cm2, (401.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke. The compression ratio rating is 15.6:1. This engine produced 172.4 PS (126.8 kW; 170.0 HP) at 2,200 rpm of PTO output power.

The Ford 8830 is equipped with power steering, power disc brakes, ROPS or Cab (optional) and 284.0 liters (75 US gal.; 62.5 Imp. gal) fuel tank.

Ford 8830 Specifications

General Specifications
Model Ford 8830
Length 4,850 mm (190.9 in)
Width 2,080 mm (81.9 in)
Height ROPS: 2,920 mm (115 in)
Cab: 2,890 mm (113.8 in)
Wheel base 2,810 mm (110.6 in)
Ground clearance 410 mm (16.1 in)
Weight 2WD ROPS: 5,895 kg (12,995 lbs)
2WD Cab: 6,165 kg (13,591 lbs)
4WD ROPS: 6,440 kg (14,200 lbs)
4WD Cab: 6,715 kg (14,800 lbs)
4WD Cab Powershift: 7,040 kg (15,520 lbs)
Fuel tank capacity 284.0 liters (75 US gal.; 62.5 Imp. gal)
Auxiliary tank: 92.7 liters (24.5 US gal, 20.4 Imp. gal)
Battery 12V
Cabin type ROPS or Cab (optional)
Engine model Ford
Engine type Four-stroke, air-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.6 L, 6,571 cm2, (401.0 cu·in)
Bore and stroke 112.0 mm X 112.0 mm (4.41 in X 4.41 in)
Compression ratio 15.6:1
Horsepower 172.4 PS (126.8 kW; 170.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 18.5 L (19.5 US. qt, 16.3 Imp. qt.)
Coolant capacity: 21.6 L (22.8 US. qt, 19 Imp. qt.)
With heater: 23.1 liters (24.4 US.qts, 20.3 Imp. qts)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Power disc
Steering capacity 1.9 L (2.0 US.qts, 1.7 Imp. qts)
Front hub (each) 0.8 L (0.85 US.qts, 0.7 Imp. qts)
Front differential 7.5 L (7.9 US.qts, 6.6 Imp. qts)
Transmission model
Transmission type Funk Ultra Command
Gears 18 forward and 9 reverse
Speed Forward: 28.8 kmh (17.9 mph) Reverse: 11.1 kmh (6.9 mph)
Transmission oil capacity 96.2 L (25.4 US. gal, 21.2 Imp. gal.)
Transmission model
Transmission type Dual Power Constant mesh
Gears 16 forward and 4 reverse
Speed Forward: 28.8 kmh (17.9 mph) Reverse: 12.0 kmh (7.5 mph)
Transmission oil capacity 2WD: 86.7 L (22.9 US. gal, 19.1 Imp. gal.)
4WD: 91.9 L (24.3 US. gal, 20.2 Imp. gal.)
Front tires Ag: 11.00-16 (2WD), 14.9/13-28 (4WD)
Rear tires Ag: 18.4/15-38
Three-Point Hitch
Category III/II
Control type Position and draft control
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000 rpm
Hydraulic system
Hydraulic type Open center gear pump, dual pumps (optional)
Pressure 2500 psi (172.4 bar)
Valves 2 to 4
Pump flow 20.0 gpm (75.7 lpm)
Dual pumps: 28.6 gpm (108.3 lpm)
SCV flow 16.9 gpm (64 lpm)
Dual pumps: 19.0 gpm (71.9 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.