Massey Ferguson 2606H

Massey Ferguson 2606HThe Massey Ferguson 2606H is a 2WD/4WD utility tractor from the 2600H series. This tractor has been manufactured by Massey Ferguson since 2016. The Massey Ferguson 2606H is equipped with a 2.6 L (157.9 cu·in) three-cylinder diesel engine and a sync shuttle transmission with 8 forward and 8 reverse gears.

The Massey Ferguson 2606H utility tractor used the Simpson engine. It is a 2.6 L, 2,587 cm2, (157.9 cu·in) three-cylinder turbocharged intercooled diesel engine with 93.0 mm (3.66 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 66 PS (48.5 kW; 65.0 HP) at 2,000 rpm of output power.

The MF 2606H is equipped with power steering, wet disc brakes, two-post folding ROPS and 54.9 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.

Following attachments are available for the Massey Ferguson 2606H utility tractor:

  • Massey Ferguson L135E loader
  • Massey Ferguson 911X loader

Massey Ferguson 2606H Specifications

General Specifications
Model Massey Ferguson 2606H
Length 2WD: 3,500 mm (137.8 in)
4WD: 3,530 mm (139 in)
Width 1,770 mm (69.7 in)
Height 2,380 mm (93.7 in)
Wheel base 2WD: 2,040 mm (80.3 in)
4WD: 2,070 mm (81.5 in)
Fuel tank capacity 54.9 liters (14.5 US gal.; 12.1 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS
Engine model Simpson
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.6 L, 2,587 cm2, (157.9 cu·in)
Bore and stroke 93.0 mm X 127.0 mm (3.66 in X 5 in)
Horsepower 66 PS (48.5 kW; 65.0 HP) at 2,000 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Final drive Outboard planetary
Differential lock Mechanical rear
Transmission model
Transmission type Sync shuttle
Gears 8 forward and 8 reverse
Front tires Ag: 7.5×16 (2WD), 9.5×24 (4WD)
Rear tires Ag: 14.9×28
Three-Point Hitch
Category II/I
Control type
Lift capacity (at 610mm/ 24 in) 1250 kg (2756 lbs)
PTO (Power take-off shaft)
Rear PTO type Live (2WD) or independent (4WD)
Rear PTO speed 540 (1.375)
Hydraulic system
Hydraulic type Open center
Valves 2
Pump flow 10.6 gpm (40.1 lpm)
Total flow 15.7 gpm (59.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.