The RK Tractors RK24H is a 4WD sub-compact utility tractor manufactured by TYM for distributor RK Tractors (a part of Rural King) since 2017. The RK Tractors RK24H is equipped with a 1.3 L (77.3 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.
The RK Tractors RK24H sub-compact utility tractor used the Yanmar 3TNV80F engine. It is a 1.3 L, 1,267 cm2, (77.3 cu·in) three-cylinder natural aspirated diesel engine with 80.0 mm (3.15 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,000 rpm of output power.
The RK Tractors RK24H is equipped with power steering, wet disc brakes, two-post ROPS, and 22.0 liters (5.8 US gal.; 4.8 Imp. gal) fuel tank.
Following attachments are available for the RK Tractors RK24H sub-compact utility tractor:
- Mid-mount RK Tractors M60 1,520 mm (60 in) mower deck
- RK Tractors L75 loader
RK Tractors RK24H Specifications
| General Specifications | |
| Model | RK Tractors RK24H |
| Length | 2,550 mm (100.4 in) |
| Width | 1,160 mm (45.7 in) |
| Height (ROPS) | 2,310 mm (90.9 in) |
| Wheel base | 1,460 mm (57.5 in) |
| Ground clearance | 230 mm (9.1 in) |
| Weight | 730 kg (1,609 lbs) |
| Fuel tank capacity | 22.0 liters (5.8 US gal.; 4.8 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post ROPS |
| Engine | |
| Engine model | Yanmar 3TNV80F |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.3 L, 1,267 cm2, (77.3 cu·in) |
| Bore and stroke | 80.0 mm X 84.0 mm (3.15 in X 3.31 in) |
| Horsepower | 24.3 PS (17.9 kW; 24.0 HP) at 3,000 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 18.0 kmh (11.2 mph) Reverse: kmh (0 mph) |
| Tires | |
| Front tires | Lawn/turf: 20×8-10 Industrial: 20×8-10 |
| Rear tires | Lawn/turf: 29×12.5-15 Industrial: 27×12.5-15 |
| Three-Point Hitch | |
| Category | I |
| Control type | Position control |
| Lift capacity (at ends) | 600 kg (1,325 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | – |
| Middle PTO speed | 2,000 rpm |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Valves | 1 |
| Pump flow | 4.18 gpm (15.8 lpm) |
| Steering flow | 2.77 gpm (10.5 lpm) |
| Total flow | 6.95 gpm (26.3 lpm) |
Be the first to comment