RK Tractors RK24H

RK Tractors RK24HThe RK Tractors RK24H is a 4WD sub-compact utility tractor manufactured by TYM for distributor RK Tractors (a part of Rural King) since 2017. The RK Tractors RK24H is equipped with a 1.3 L (77.3 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.

The RK Tractors RK24H sub-compact utility tractor used the Yanmar 3TNV80F engine. It is a 1.3 L, 1,267 cm2, (77.3 cu·in) three-cylinder natural aspirated diesel engine with 80.0 mm (3.15 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,000 rpm of output power.

The RK Tractors RK24H is equipped with power steering, wet disc brakes, two-post ROPS, and 22.0 liters (5.8 US gal.; 4.8 Imp. gal) fuel tank.

Following attachments are available for the RK Tractors RK24H sub-compact utility tractor:

  • Mid-mount RK Tractors M60 1,520 mm (60 in) mower deck
  • RK Tractors L75 loader

RK Tractors RK24H Specifications

General Specifications
Model RK Tractors RK24H
Length 2,550 mm (100.4 in)
Width 1,160 mm (45.7 in)
Height (ROPS) 2,310 mm (90.9 in)
Wheel base 1,460 mm (57.5 in)
Ground clearance 230 mm (9.1 in)
Weight 730 kg (1,609 lbs)
Fuel tank capacity 22.0 liters (5.8 US gal.; 4.8 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine model Yanmar 3TNV80F
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,267 cm2, (77.3 cu·in)
Bore and stroke 80.0 mm X 84.0 mm (3.15 in X 3.31 in)
Horsepower 24.3 PS (17.9 kW; 24.0 HP) at 3,000 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 18.0 kmh (11.2 mph) Reverse: kmh (0 mph)
Front tires Lawn/turf: 20×8-10
Industrial: 20×8-10
Rear tires Lawn/turf: 29×12.5-15
Industrial: 27×12.5-15
Three-Point Hitch
Category I
Control type Position control
Lift capacity (at ends) 600 kg (1,325 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO speed 2,000 rpm
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type
Valves 1
Pump flow 4.18 gpm (15.8 lpm)
Steering flow 2.77 gpm (10.5 lpm)
Total flow 6.95 gpm (26.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.