Ford 640

Ford 640The Ford 640 is a 2WD utility tractor form the 600 Series. This tractor was manufactured by Ford in Highland Park, Michigan, USA from 1964 to 1967. The Ford 640 is equipped with a 2.2 L (134.0 cu·in) four-cylinder gasoline/LP-gas engine and an unsynchronized gear type transmission with 4 forward and 1 reverse gear and dry disc clutch.

The Ford 640 utility tractor used the Ford EAE Red Tiger engine. It is a 2.2 L, 2,196 cm2, (134.0 cu·in) four-cylinder natural aspirated gasoline/LP-gas engine with 87.0 mm (3.43 in) of the cylinder bore and 91.0 mm (3.58 in) of the piston stroke. The compression ratio rating is 6.6:1.

The Ford 640 is equipped with manual or power assist (option) steering, differential mechanical expanding shoe brakes, open operator station, and 41.6 liters (11 US gal.; 9.2 Imp. gal) fuel tank.

Ford 600 Series tractor variants:

  • 620 No PTO, hydraulics, or 3-point hitch
  • 630 No PTO
  • 640 Four-speed
  • 650 Five-speed
  • 660 Five-speed, live PTO

Ford 640 Specifications

General Specifications
Model Ford 640
Length 3,080 mm (121.3 in)
Width 1,640 mm (64.6 in)
Height 1,490 mm (58.7 in)
Wheel base 1,910 mm (75.2 in)
Ground clearance 530 mm (20.9 in)
Weight 1,370 kg (3,020 lbs)
Fuel tank capacity 41.6 liters (11 US gal.; 9.2 Imp. gal)
Battery 6V
Cabin type Open operator station
Engine model Ford EAE Red Tiger
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline/LP-gas
Displacement 2.2 L, 2,196 cm2, (134.0 cu·in)
Bore and stroke 87.0 mm X 91.0 mm (3.43 in X 3.58 in)
Compression ratio 6.6:1
Starter Electric
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 14.2 L (15 US. qt, 12.5 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual or power assist (option)
Brakes Differential mechanical expanding shoe
Transmission model
Transmission type Unsynchronized gear with dry disc clutch
Gears 4 forward and 1 reverse
Speed Forward: 22.0 kmh (13.7 mph) Reverse: 6.9 (4.3 mph)
Front tires Ag: 5.50-16
Rear tires Ag: 11-28
Three-Point Hitch
Category I
Control type
Lift capacity (at ends) 567 kg (1,250 lbs)
PTO (Power take-off shaft)
Rear PTO type Transmission
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity 8.5 L (2.2 US. gal, 1.9 Imp. gal.)
Steering flow 6.5 gpm (24.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.