David Brown 996 utility tractor: review and specs

The David Brown 996 is a 2WD utility tractor manufactured by David Brown in Meltham Mills, Huddersfield, England from 1971 to 1980. The David Brown 996 is equipped with a 3.6 L (219.3 cu·in) four-cylinder diesel engine and a synchromesh transmission with 12 forward and 4 reverse gears.

The David Brown 996 utility tractor used the David Brown engine. It is a 3.6 L, 3,594 cm², (219.3 cu·in) four-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 64.9 PS (47.7 kW; 64 HP) at 2,200 rpm of output power.

The David Brown 996 is equipped with hydrostatic power steering, hydraulic drum brakes, open operator station or Quiet Cab (optional), and 60.6 liters (16 US gal.; 13.3 Imp. gal) fuel tank.

David Brown 996 Specifications

General Specifications
Model	David Brown 996
Length	3,300 mm (129.9 in)
Width	1,700 mm (66.9 in)
Height	2,510 mm (98.8 in)
Wheel base	2,080 mm (81.9 in)
Ground clearance	400 mm (15.7 in)
Weight	2,610 kg (5,754 lbs)
Fuel tank capacity	60.6 liters (16 US gal.; 13.3 Imp. gal)
Battery	12V, 96Ah
Cabin type	Open operator station or Quiet Cab (optional)
Engine
Engine model	David Brown
Engine type	Four-stroke, liquid-cooled, inline
Cylinders	4
Fuel type	Diesel
Displacement	3.6 L, 3,594 cm², (219.3 cu·in)
Bore and stroke	100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio	17.0:1
Horsepower	64.9 PS (47.7 kW; 64 HP) at 2,200 rpm
Starter	Electric
Coolant capacity:	13.2 L (13.9 US. qt, 11.6 Imp. qt.)

Transmission and chassis
Chassis	4×2 2WD
Steering type	Hydrostatic power
Brakes	Hydraulic drum
Transmission model
Transmission type	Synchromesh
Gears	12 forward and 4 reverse
Tires
Front tires	Ag: 7.50-16
Rear tires	Ag: 16.9-30, 13.6-36

Three-Point Hitch
Caterogy	II/I
Control type	–
Lift capacity (at ends)	910 kg (2,010 lbs)
PTO (Power take-off shaft)
Rear PTO type	Independent
Rear PTO speed	540/1,000 rpm
Hydraulic system
Hydraulic type	Gear pump
Pump flow	7.4 gpm (28 lpm)

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.