The John Deere 7710 is a 2WD or 4WD row-crop tractor from the 7010 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1997 to 2003. The John Deere 7710 is equipped with a 8.1 L (496.0 cu·in) six-cylinder diesel engine and one of four transmission variants.
The JD 7710 row-crop tractor used the John Deere PowerTech engine. It is a 8.1 L, 8,128 cm2, (496.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 157.2 PS (115.6 kW; 155.0 HP) at 2100 rpm of output power and 707.8 N·m (72.2 kg·m, 521.6 ft·lb) of torque.
The John Deere 7710 is equipped with power steering, hydraulic wet disc brakes, cab (standard), and 270.6 liters (71.5 US gal.; 59.5 Imp. gal) fuel tank for ROPS version or 344.4 liters (91.0 US gal, 75.8 Imp. gal) for the version with cab.
John Deere 7710 Specifications
| General Specifications | |
| Model | John Deere 7710 |
| Length | 4,390 mm (172.8 in) |
| Width | 2,790 mm (109.8 in) |
| Height | 2,970 mm (116.9 in) |
| Wheel base | 2WD: 2,900 mm (114.2 in) 4WD: 2,790 mm (109.8 in) |
| Weight (shipping) | 2WD: 5,600 kg (12,346 lbs) 4WD: 6,415 kg (14,143 lbs) |
| Fuel tank capacity | ROPS: 270.6 liters (71.5 US gal.; 59.5 Imp. gal) Cab: 344.4 liters (91.0 US gal.; 75.8 Imp. gal) |
| Battery | Two 12V, CCA 925A |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | John Deere PowerTech |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 8.1 L, 8,128 cm2, (496.0 cu·in) |
| Bore and stroke | 116.0 mm X 129.0 mm (4.57 in X 5.08 in) |
| Compression ratio | 16.5:1 |
| Horsepower | 157.2 PS (115.6 kW; 155.0 HP) at 2100 rpm |
| Torque | 707.8 N·m (72.2 kg·m, 521.6 ft·lb) |
| Starter | Electric |
| Oil capacity: | 23.7 L (25 US. qt, 20.9 Imp. qt.) |
| Coolant capacity: | 26.0 L (27.5 US. qt, 22.9 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Final drive | Inboard planetary |
| Differential lock | Electro-hydraulic rear |
| Front axle | 14.4 L (15.2 US.qts, 12.7 Imp. qts) |
| Front hubs | 1.9 L (2.0 US.qts, 1.7 Imp. qts) |
| Transmission model | John Deere PowrQuad |
| Transmission type | Partial power shift |
| Gears | 16 forward and 16 reverse |
| Speed | Forward: 28.8 kmh (17.9 mph) Reverse: 29.9 kmh (18.6 mph) |
| Transmission oil capacity | 2WD: 86.7 L (22.9 US. gal, 19.1 Imp. gal.) 4WD: 98.0 L (25.9 US. gal, 21.6 Imp. gal.) |
| Transmission model | John Deere PowerShift |
| Transmission type | Full power shift |
| Gears | 19 forward and 7 reverse |
| Speed | Forward: 37.7 kmh (23.4 mph) Reverse: 15.8 kmh (9.8 mph) |
| Transmission oil capacity | 2WD: 90.9 L (24.0 US. gal, 20.0 Imp. gal.) 4WD: 102.2 L (27.0 US. gal, 22.5 Imp. gal) |
| Transmission model | John Deere AutoQuad |
| Transmission type | Partial power shift |
| Gears | 20 forward and 20 reverse |
| Speed | Forward: 38.0 kmh (23.6 mph) |
| Transmission oil capacity | 2WD: 86.7 L (22.9 US. gal, 19.1 Imp. gal.) 4WD: 98.0 L (25.9 US. gal, 21.6 Imp. gal.) |
| Transmission model | AutoPowr |
| Transmission type | Infinitely Variable Transmission (IVT) |
| Gears | Infinite forward and reverse |
| Tires | |
| Front tires | Ag: 11.00-16 (2WD), 14.9-28 (4WD) |
| Rear tires | Ag: 18.4-38 |
| Three-Point Hitch | |
| Category | IIIN/II |
| Control type | – |
| Lift capacity (at ends) | Standard: 4,050 kg (8,925 lbs) Optional: 4,560 kg (10,050 lbs) |
| Front hitch | IIIN/II (optional) |
| Front lift capacity | 3,490 kg (7,700 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with hydraulic wet disc clutch |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure flow compensated (PFC) |
| Pressure | 2900 psi (199.9 bar) |
| Valves | 2 to 5 |
| Pump flow | 26.0 gpm (98.4 lpm) |
Be the first to comment