Massey Ferguson 268 Xtra tractor: review and specs

The Massey Ferguson 268 Xtra is a two-wheel or four-wheel tractor, manufactured under Massey Ferguson brand. The Massey Ferguson 268 Xtra tractor is equipped with Simpson S436 (3.6 L, 219.7 cu.in.) diesel engine and two transmission options: Sliding Spur transmission with 8 forward and 2 reverse or Synchromesh transmission with 12 forward and 4 reverse.

The 268 Xtra tractor used a four-cylinder naturally-aspirated liquid-cooled direct injection diesel engine Simpson S436, with 95 mm (3.74 in) of the cylinder bore and 127 mm (5 in) of the piston stroke. The Simpson S436 engine produced 64 PS (47 kW; 63 HP) at 2,300 rpm of output power and 226 Nm (23 kg·m; 166.8 ft·lb) at 1,800 rpm of torque. The engine used a dry air cleaner

The Massey Ferguson 268 Xtra used hydrostatic power-assisted steering and dual dry type clutch, mechanical differential and oil immersed mechanical actuated brakes. The Massey Ferguson 268 Xtra used open operator station.

Massey Ferguson 268 Xtra specifications

General Specifications
Model	Massey Ferguson 268 Xtra
Length	3,890 mm (153 in.)
Width	–
Height	2,520 mm (99.2 in.)
Wheelbase	2,050 mm (80.7 in.)
Ground clearance	–
Weight (operating)	2,820 kg (6,217 lb.)
Fuel tank capacity	60 l (15.8 Gal.)
Battery	12V

Engine
Engine model	Simpson S436
Number of Cylinders	4
Firing order	–
Fuel	Diesel
Displacement	3.6 L, (219.7 cu.in.)
Bore x stroke	95 x 127 mm (3.76 x 5.0 in)
Power output	64 PS (47 kW; 63 HP) at 2,300 rpm
Torque	226 Nm (23 kg·m; 166.8 ft·lb) at 1,800 rpm
Starter type	Electric starter
Oil type	–

Tires size
Front tires	7.50-16
Rear tires	16.9-28

Transmission and chassis
Chassis	4×2 2WD or 4×4 4WD
Steering	Hydrostatic
Sliding Spur transmission
Transmission type	Sliding gear
Gears	8 forward and 2 reverse
Sinchromesh transmission
Transmission type	Sinchromesh
Gears	12 forward and 4 reverse
PTO (Power take-off shaft)
PTO Type:	Rear, live type
PTO Speed:	540 rpm
Hydraulic lift
3-point linkage:	Category II
Control system:	–
No. of remote valves:	–
Max lifting capacity (at link end):	2,050 kg (4519 lb.)
Hydraulic system
Type	Ferguson system
Max oil flow	18.0 lpm
Pressure	176 bar

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.