The Kubota L2501 is a 2WD/4WD compact utility tractor from the L-series. This tractor has been manufactured by the Kubota from 2014. The Kubota L2501 is equipped with 1.6 L three-cylinders diesel engine and one of two transmissions: gear type transmission with dry disc clutch (8 forward and 4 reverse gears) or hydrostatic transmission (infinite forward and reverse in 3-range).
The Kubota L2501 utility tractor used the Kubota D1703-M-DI-E4. It is a 1.6 L, 1,647 cm2, (100.5 cu·in) three-cylinders direct injection diesel engine with 87.0 mm (3.43 in) of cylinder bore and 92.4 mm (3.64 in) of piston stroke. This engine produced 25.2 PS (18.5 kW; 24.8 HP) of gross output power and 24.2 PS (17.8 KW; 23.9 HP) of net horsepower.
The Kubota L2501 is equipped with integral type power steering, mechanical wet disc brakes, open operator station with two-post folding ROPS (rollover protection structure) and 38.0 liters (10 US gal.; 8.4 Imp. gal) fuel tank.
Following attachments are available for Kubota L2501 utility tractor:
- Kubota LA525 loader
- Kubota BH77 backhoe
Kubota L2501 Specifications
| General Specifications | |
| Model | Kubota L2501 |
| Length | 2WD: 2,810 mm (110.6 in) 4WD and HST: 2,700 mm (106.3 in) |
| Width | 1,400 mm (55.1 in) |
| Height | 1,475 mm (58.1 in) |
| Wheel base | 1,610 mm (63.4 in) |
| Weight | 1,100 kg (2425.1 lbs) |
| Fuel tank capacity | 38.0 liters (10 US gal.; 8.4 Imp. gal) |
| Battery | 12V, CCA 490A |
| Cabin type | Open operator station with Two-post folding ROPS |
| Engine | |
| Engine model | Kubota D1703-M-DI-E4 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.6 L, 1,647 cm2, (100.5 cu·in) |
| Bore and stroke | 87.0 mm X 92.4 mm (3.43 in X 3.64 in) |
| Compression ratio | – |
| Horsepower | Gross: 25.2 PS (18.5 kW; 24.8 HP) Net: 24.2 PS (17.8 KW; 23.9 HP) |
| Torque | 95.2 N·m (9.7 kg·m, 70.2 ft·lb) |
| Starter | Electric |
| Oil capacity: | 5.7 L (6.02 US. qt, 5.02 Imp. qt.) |
| Coolant capacity: | 6.0 L (6.34 US. qt, 5.28 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Integral type power steering |
| Brakes | Mechanical wet disc |
| Transmission model | – |
| Transmission type | Gear type with dry disc clutch |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 17.2 kmh (10.7 mph) Reverse: 6.3 (3.9 mph) |
| Transmission oil capacity | 27.0 L (28.5 US. qt, 23.8 Imp. qt.) |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Speed | Forward: 18.5 kmh (11.5 mph) Reverse: 16.6 (10.3 mph) |
| Transmission oil capacity | 23.5 L (24.83 US. qt, 20.68 Imp. qt.) |
| Tires | |
| Front tires | Ag: 5-15 (2WD); 11.2-24 (4WD) |
| Rear tires | Ag: 7.2-16 (2WD); 11.2-24 (4WD) |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control |
| Lift capacity | 870 kg (1,920 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Gear: Transmission driven with overrunning HST: Live-continuous running |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2,205 psi (152 bar) |
| Pump flow | 5.15 gpm (19.5 lpm) |
| Steering flow | 3.13 gpm (11.8 lpm) |
Can I send a picture
in hilly terrain what is the safety incline limit