The Kubota M7.171 is a 4WD row-crop tractor from the M7 series. This tractor has been manufactured by Kubota in Bierne, France from 2015. The Kubota M7-171 is equipped with a 6.1 L (374.0 cu·in) four-cylinder diesel engine and one of two transmissions: a power shift transmission with 24 forward and reverse gears or a continuously variable transmission transmission with infinite forward and reverse gears.
The Kubota M7-171 row-crop tractor used the Kubota V6108 engine. It is a 6.1 L, 6,129 cm2, (374.0 cu·in) four-cylinder natural aspirated diesel engine with 118.0 mm (4.65 in) of the cylinder bore and 140.0 mm (5.51 in) of the piston stroke. This engine produced 175.4 PS (129.0 kW; 173.0 HP) of output power.
The Kubota M7.171 is equipped with power steering, Cab (standard) and 329.3 liters (87 US gal.; 72.4 Imp. gal) fuel tank.
Kubota M7.171 Specifications
General Specifications | |
Model | Kubota M7.171 |
Length | 4,770 mm (187.8 in) |
Width |
Flange axle: 2,490 mm (98 in) Bar axle: 2,790 mm (109.8 in) |
Height | 3,020 mm (118.9 in) |
Wheel base | – |
Weight (shipping) | 6,848 kg (15,097 lbs) |
Fuel tank capacity | 329.3 liters (87 US gal.; 72.4 Imp. gal) |
Battery | 12V |
Cabin type | Cab (standard) |
Engine | |
Engine model | Kubota V6108 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 6.1 L, 6,129 cm2, (374.0 cu·in) |
Bore and stroke | 118.0 mm X 140.0 mm (4.65 in X 5.51 in) |
Horsepower | 175.4 PS (129.0 kW; 173.0 HP) |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | – |
Transmission model | ZF |
Transmission type | Power shift with hydraulic wet disc clutch |
Gears | 24 forward and reverse |
Transmission model | ZF |
Transmission type | Continuously variable transmission |
Gears | Infinite forward and reverse |
Tires | |
Front tires | Ag: 14.9R28 |
Rear tires | Ag: 18.4R38 |
Three-Point Hitch | |
Category | III |
Control type | Lower-link electronic draft sensing |
Lift capacity (at ends) | 6,700 kg (14,775 lbs) |
PTO (Power take-off shaft) | |
Front PTO type | Independent |
Front PTO speed | 1000 rpm |
Rear PTO type | Independent |
Rear PTO speed | 540/540E/1000/1000E rpm |
Hydraulic system | |
Hydraulic type | Open center or closed center load sensing |
Pump flow |
21.0 gpm (79.5 lpm) 29.0 gpm (109.8 lpm) |