Leyland 384

Leyland 384The Leyland 384 is a 2WD farm tractor manufactured by Leyland from 1969 to 1971. The Leyland 384 is equipped with a 3.8 L (230.1 cu·in) four-cylinder diesel engine and a transmission with 10 forward and 2 reverse gears.

The Leyland 384 farm tractor used the Leyland 38 TD engine. It is a 3.8 L, 3,771 cm2, (230.1 cu·in) four-cylinder diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. The compression ratio rating is 17.3:1. This engine produced 71 PS (52.2 kW; 70.0 HP) at 2,200 rpm of output power and 238.7 N·m (24.3 kg·m, 175.9 ft·lb) at 1,400 rpm of torque.

The Leyland 384 is equipped with manual steering, mechanical dry disc brakes, an open operator station or cab (optional), and 68.1 liters (18 US gal.; 15 Imp. gal) fuel tank.

Leyland 384 Specifications

General Specifications
Model Leyland 384
Length 3,400 mm (133.9 in)
Width
Height 2,480 mm (97.6 in)
Wheel base 2,030 mm (79.9 in)
Weight 2,585 kg (5,699 lbs)
Fuel tank capacity 68.1 liters (18 US gal.; 15 Imp. gal)
Battery 12V, 128Ah
Cabin type Open operator station or cab optional
Engine
Engine model Leyland 38 TD
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.8 L, 3,771 cm2, (230.1 cu·in)
Bore and stroke 100.0 mm X 120.0 mm (3.94 in X 4.72 in)
Compression ratio 17.3:1
Horsepower 71 PS (52.2 kW; 70.0 HP) at 2,200 rpm
Torque 238.7 N·m (24.3 kg·m, 175.9 ft·lb) at 1,400 rpm
Starter Electric
Coolant capacity: 13.6 L (14.4 US. qt, 12 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Mechanical dry disc
Final drives Spur gear
Transmission model
Transmission type
Gears 10 forward and 2 reverse
Transmission oil capacity 56.5 L (14.9 US. gal, 12.4 Imp. gal.)
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 12.00-36
Three-Point Hitch
Category II/I
Control type Position and draft control
Lift capacity (at ends) 2,233 kg (4,924 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 56.4 L (14.9 US. gal, 12.4 Imp. gal.)
Pump flow 7.8 gpm (29.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*