The Zetor 3340 is a 4WD utility tractor from the Range 1 series. This tractor was manufactured by Zetor in Brno, Czech Republic from 1993 to 1997. The Zetor 3340 is equipped with a 2.7 L (164.6 cu·in) three-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 10 forward and 2 reverse gears or a mech shuttle transmission with 10 forward and 10 reverse gears.
The Zetor 3340 utility tractor used the Zetor Z5201 engine. It is a 2.7 L, 2,697 cm2, (164.6 cu·in) three-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 46.6 PS (34.3 kW; 46 HP) at 2,200 rpm of output power.
The Zetor 3340 is equipped with power steering, hydraulic dry disc brakes, cab (standard), and 45.4 liters (12 US gal.; 10 Imp. gal) fuel tank. This tractor could be equipped with the Zetor 100 loader.
Zetor 3340 Specifications
| General Specifications | |
| Model | Zetor 3340 |
| Length | 3,660 mm (144.1 in) |
| Width | 1,840 mm (72.4 in) |
| Height (cab) | 2,590 mm (102 in) |
| Wheel base | 2,246 mm (88.4 in) |
| Ground clearance | 380 mm (15.0 in) |
| Weight (operating) | 3,210 kg (7,080 lbs) |
| Fuel tank capacity | 45.4 liters (12 US gal.; 10 Imp. gal) |
| Battery | 12V, CCA 950A |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | Zetor Z5201 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.7 L, 2,697 cm2, (164.6 cu·in) |
| Bore and stroke | 102.0 mm X 110.0 mm (4.02 in X 4.33 in) |
| Compression ratio | 17.0:1 |
| Horsepower | 46.6 PS (34.3 kW; 46.0 HP) at 2,200 rpm |
| Starter | Electric |
| Oil type | CD+, CE, CF-4 |
| Oil capacity: | 9.0 L (9.5 US. qt, 7.9 Imp. qt.) |
| Coolant capacity: | W/o heater: 9.5 L (10 US. qt, 8.4 Imp. qt.) With heater: 10.5 L (11 US. qt, 9.2 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic dry disc |
| Transmission model | – |
| Transmission type | Synchromesh |
| Gears | 10 forward and 2 reverse |
| Speed | Forward: 26.2 kmh (16.3 mph) Reverse: 5.6 kmh (3.5 mph) |
| Transmission model | |
| Transmission type | Mech shuttle |
| Gears | 10 forward and 10 reverse |
| Tires | |
| Front tires | Ag: 9.5×24, 11.2×24 |
| Rear tires | Ag: 14.9×28, 12.4×36, 16.9×28, 12.4×32 |
| Three-Point Hitch | |
| Category | II |
| Control type | – |
| Lift capacity (at ends) | 1,750 kg (3,860 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2610 psi (180 bar) |
| Valves | 1 |
| Steering flow | 4.0 gpm (15.1 lpm) |
| Total flow | 8.5 gpm (32.2 lpm) |
Be the first to comment