The Long 2460 is a 2WD lawn tractor manufactured by UTB/Universal in Brasov, Romania for distributor Long from 1990 to 1997. The Long 2460 is equipped with a 2.3 L (142.8 cu·in) three-cylinder diesel engine and a partially synchronized transmission with 8 forward and 2 reverse gears.
The Long 2460 lawn tractor used the Uzina D-115 engine. It is a 2.3 L, 2,340 cm2, (142.8 cu·in) three-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 42.4 PS (31.2 kW; 41.8 HP) at 2,400 rpm of output power.
The Long 2460 is equipped with hydrostatic power steering, dry band brakes, open operator station and 62.0 liters (16.4 US gal.; 13.6 Imp. gal) fuel tank.
Long 2460 Specifications
| General Specifications | |
| Model | Long 2460 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 1,950 mm (76.8 in) |
| Weight | 1,915 kg (4,222 lbs) |
| Fuel tank capacity | 62.0 liters (16.4 US gal.; 13.6 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Uzina D-115 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.3 L, 2,340 cm2, (142.8 cu·in) |
| Bore and stroke | 95.0 mm X 110.0 mm (3.74 in X 4.33 in) |
| Horsepower | 42.4 PS (31.2 kW; 41.8 HP) at 2,400 rpm |
| Starter | Electric |
| Oil capacity: | 6.9 L (7.3 US. qt, 6.1 Imp. qt.) |
| Coolant capacity: | 12.8 L (13.5 US. qt, 11.3 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Dry band |
| Transmission model | – |
| Transmission type | Partially synchronized |
| Gears | 8 forward and 2 reverse |
| Speed | Forward: 25.2 kmh (15.7 mph) Reverse: (0 mph) |
| Transmission oil capacity | 19.9 L (5.3 US. gal, 4.4 Imp. gal.) |
| Tires | |
| Front tires | Ag: 6.00-16 (2WD), 8.3-24 (4WD) |
| Rear tires | Ag: 14.9-28 |
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | – |
| Lift capacity (at ends) | 1,200 kg (2,645 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Live |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 19.9 L (5.3 US. gal, 4.4 Imp. gal.) |
| Valves | 1 |
| Total flow | 9.0 gpm (34.1 lpm) |
I appreciate the specifications, I was initially afraid to purchase the Long 2460 but this change my perspective.
how to contact someone in parts