Long 610

Long 610The Long 610 is a 2WD or 4WD utility tractor manufactured by UTB/Universal in Brasov, Romania for distributor Long from 1979 to 1990. The Long 610 is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and a transmission with 8 forward and 2 reverse gears.

The Long 610 utility tractor used the UTB/Universal engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 65.1 PS (47.9 kW; 64.2 HP) at 2,400 rpm of output power.

The Long 610 is equipped with hydrostatic power steering, independent contracting band brakes, open operator station and 54.0 liters (14.3 US gal.; 11.9 Imp. gal) fuel tank.

Long 610 Specifications

General Specifications
Model Long 610
Length
Width
Height
Wheel base 1,950 mm (76.8 in)
Weight (operating) 2,130 kg (4,696 lbs)
Fuel tank capacity 54.0 liters (14.3 US gal.; 11.9 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model UTB/Universal
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.6 L, 3,589 cm2, (219.0 cu·in)
Bore and stroke 102.0 mm X 110.0 mm (4.02 in X 4.33 in)
Horsepower 65.1 PS (47.9 kW; 64.2 HP) at 2,400 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Independent contracting band
Transmission model
Transmission type
Gears 8 forward and 2 reverse
Speed Forward: 25.6 kmh (15.9 mph) Reverse: 12.9 (8 mph)
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 16.9-28
Three-Point Hitch
Caterogy II/I
Control type
Lift capacity (at ends) 1,200 kg (2,645 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 68.1 L (18 US. gal, 15 Imp. gal.)
Valves 1
Total flow 5.75 gpm (21.8 lpm)