The International Harvester 484 is a 2WD utility tractor from the 84 series. This tractor was manufactured by International Harvester in Doncaster, England from 1977 to 1982. The International Harvester 484 is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and a syncromesh with dry disc clutch transmission with 8 forward and 4 reverse gears.
The International 484 utility tractor used the International Harvester D179 engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. This engine produced 50.7 PS (37.3 kW; 50.0 HP) at 2,200 rpm of output power.
The IH 484 is equipped with power steering, independent hydraulic wet disc brakes, two-post fixed ROPS, and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.
International Harvester 484 Specifications
| General Specifications | |
| Model | International Harvester 484 |
| Length | Utility: 3,390 mm (133.5 in) Low-profil: 3,510 mm (138.2 in) |
| Width | Utility: 1,780 mm (70.1 in) Low-profil: 1,990 mm (78.3 in) |
| Height (steering wheel) | Utility: 1,540 mm (60.6 in) Low-profil: 1,430 mm (56.3 in) |
| Wheel base | Utility: 2,000 mm (78.7 in) Low-profil: 1,980 mm (78 in) |
| Ground clearance | Utility: 400 mm (15.7 in) Low-profil: 270 mm (10.6 in) |
| Weight (shipping) | Utility: 2,360 kg (5,203 lbs) Low-profil: 2,330 kg (5,137 lbs) |
| Fuel tank capacity | 75.7 liters (20 US gal.; 16.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post fixed ROPS |
| Engine | |
| Engine model | International Harvester D179 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
| Bore and stroke | 98.0 mm X 129.0 mm (3.86 in X 5.08 in) |
| Horsepower | 50.7 PS (37.3 kW; 50.0 HP) at 2,200 rpm |
| Starter | Electric |
| Oil capacity: | 6.4 L (6.8 US. qt, 5.6 Imp. qt.) |
| Coolant capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Power |
| Brakes | Independent hydraulic wet disc |
| Transmission model | – |
| Transmission type | Syncromesh with dry disc clutch |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 26.8 kmh (16.7 mph) Reverse: 8.4 (5.2 mph) |
| Transmission oil capacity | 34.1 L (9 US. gal, 7.5 Imp. gal.) |
| Tires | |
| Front tires | Ag: 6.00-16 |
| Rear tires | Ag: 13.6-28 |
| Three-Point Hitch | |
| Category | II |
| Control type | Position control and draft control |
| Lift capacity (at ends) | 1,405 kg (3,100 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with hydraulic wet disc clutch |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 34.1 L (9 US. gal, 7.5 Imp. gal.) |
| Valves | 0 to 2 |
| Total flow | 15.4 gpm (58.3 lpm) |
Be the first to comment