The Allis Chalmers 5045 is a 2WD utility tractor manufactured by the Fiat for Allis Chalmers in Italy from 1981 to 1983. The Allis Chalmers 5045 is equipped with 2.6 L three-cylinder diesel engine and partially synchronized transmission (8 forward and 2 reverse gears) with dry disc clutch.
The Allis Chalmers 5045 utility tractor used 2.6 L, 2,589 cm2, (158 cu·in) three-cylinders diesel engine with 100.0 mm (3.94 in) of cylinder bore and 110.0 mm (4.33 in) of piston stroke. This engine produced 44.6 PS (32.8 kW; 44 HP) of maximum output power.
The Allis Chalmers 5045 is equipped with a hydraulic power steering, open operator station, ROPS (Rollover protection structure) was available as an option and 54.0 liters (14.3 US gal.; 11.9 Imp. gal) fuel tank.
Allis Chalmers 5045 Specifications
| General Specifications | |
| Model | Allis Chalmers 5045 |
| Model | Allis Chalmers 5045 |
| Length | 2,979 mm (117.3 in) |
| Width | 1,549 mm (61 in) |
| Height | – |
| Wheel base | 1,910 mm (75.2 in) |
| Weight | 1,750 kg (3,858 lbs) |
| Fuel tank capacity | 54.0 liters (14.3 US gal.; 11.9 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station. ROPS optional. |
| Engine | |
| Engine model | Fiat |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.6 L, 2,589 cm2, (158 cu·in) |
| Bore and stroke | 100.0 mm X 110.0 mm (3.94 in X 4.33 in) | Compression ratio | 17.0:1 |
| Horsepower | 44.6 PS (32.8 kW; 44 HP) at rpm |
| Starter | Electric |
| Oil capacity: | 13.5 L (14.27 US. qt, 11.88 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Hydraulic power |
| Brakes | – |
| Transmission model | – |
| Transmission type | Partially synchronized with dry disc clutch |
| Gears | 8 forward and 2 reverse |
| Speed | Forward: 24.2 kmh (15 mph) Reverse: 12.2 (7.6 mph) |
| Tires | |
| Front tires | Ag: 6.00-16 |
| Rear tires | Ag: 13.6-28 |
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | Position control and top-link draft sensing |
| Lift capacity | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 23.6 L (24.94 US. qt, 20.77 Imp. qt.) |
| Valves | 14 |