Claas Challenger 95E

Claas Challenger 95EThe Claas Challenger 95E is a agricultural crawler from the series. This tractor was manufactured by Claas from 1998 to 2001. The Claas 95E is equipped with a 12.0 L (729.2 cu·in) six-cylinder diesel engine and a full powershift transmission with 10 forward and 2 reverse gears.

The Claas 95E agricultural crawler used the Caterpillar engine. It is a 12.0 L, 11,950 cm2, (729.2 cu·in) six-cylinder turbocharged intercooled diesel engine with 130.0 mm (5.12 in) of the cylinder bore and 150.0 mm (5.91 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 415.8 PS (305.7 kW; 410.0 HP) at 2,100 rpm of output power.

The Claas 95E is equipped with hydrostatic differential steering, hydraulic caliper disc brakes, Cab (standard), and 1060.0 liters (280 US gal.; 233.2 Imp. gal) fuel tank.

Claas 95E Specifications

General Specifications
Model Claas Challenger 95E
Length
Width
Height
Wheel base 2,710 mm (106.7 in)
Weight 16,100 kg (35,494 lbs)
Fuel tank capacity 1060.0 liters (280.0 US gal.; 233.2 Imp. gal)
Battery 12V
Cabin type Cab (standard)
Engine
Engine model Caterpillar
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 12.0 L, 11,950 cm2, (729.2 cu·in)
Bore and stroke 130.0 mm X 150.0 mm (5.12 in X 5.91 in)
Compression ratio 16.0:1
Horsepower 415.8 PS (305.7 kW; 410.0 HP) at 2,100 rpm
Starter Electric
Coolant capacity: 75.7 L (80 US. qt, 66.6 Imp. qt.)
Transmission and chassis
Chassis Crawler
Steering type Hydrostatic differential steering
Brakes Hydraulic caliper disc
Transmission model
Transmission type Full power shift
Gears 10 forward and 2 reverse
Speed Forward: 28.9 kmh (18 mph) Reverse: 7.6 (4.7 mph)
Tracks
Track 25-in track
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed center
Valves 4
Total flow 40.0 gpm (151.4 lpm)