Cub Cadet AGS 2160

Cub Cadet AGS 2160The Cub Cadet AGS 2160 is a 2WD garden tractor from the 2000 series. This tractor was manufactured by the Cub Cadet (a part of MTD) from 1994 to 1997. The Cub Cadet AGS 2160 is equipped with a 0.5 L V-twin gasoline engine and shaft-driven gear type transmission with 6 forward and reverse gears.

The Cub Cadet AGS 2160 garden tractor used the Briggs & Stratton Vanguard engine. It is a 0.5 L, 480 cm2, (29.3 cu·in) V-twin naturally aspirated gasoline engine with 68.0 mm (2.68 in) of the cylinder bore and 66.0 mm (2.6 in) of the piston stroke. This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm of maximum output power.

The Cub Cadet AGS 2160 is equipped with manual steering, internal expanding brakes, open operator station, 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank and mid-mount 46 in (1,160 mm) mower deck with 2-blades.

Cub Cadet AGS 2160 Specifications

General Specifications
Model Cub Cadet AGS 2160
Length 1,820 mm (71.7 in)
Width 990 mm (39 in)
Height 1,090 mm (42.9 in)
Wheel base 1,190 mm (46.9 in)
Weight
Fuel tank capacity 11.4 liters (3 US gal.; 2.5 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model Briggs & Stratton Vanguard
Engine type Four-stroke, air-cooled, V-twin
Cylinders 2
Fuel type Gasoline
Displacement 0.5 L, 480 cm2, (29.3 cu·in)
Bore and stroke 68.0 mm X 66.0 mm (2.68 in X 2.6 in)
Horsepower 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm
Starter Electric
Oil capacity: 1.7 L (1.8 US. qt, 1.5 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Internal expanding
Transmission model Auto Gear System
Transmission type Shaft-driven gear type
Gears 6 forward and reverse
Transmission oil capacity 5.7 L (6.02 US. qt, 5.02 Imp. qt.)
Tires
Front tires Lawn/turf: 16×6.5-8
Rear tires Lawn/turf: 23×9.5-12
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO spped
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*