Farmall 140

Farmall 140The Farmall 140 is a 2WD utility tractor manufactured by International Harvester from 1958 to 1973. The Farmall 140 is equipped with a 2.0 L four-cylinder gasoline engine and sliding gear transmission with 4 forward and 1 reverse gear.

The Farmall 140 utility tractor used the International Harvester C-123 engine. It is a 2.0 L, 2,010 cm2, (122.7 cu·in) four-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. This engine produced 21.4 PS (15.7 kW; 21.0 HP) of maximum output power.

The Farmall 140 is equipped with manual steering, differential contracting band brakes, open operator station and 41.6 liters (11 US gal.; 9.2 Imp. gal) fuel tank. The Farmall 140 tractor could be equipped with the International Harvester 1000 loader.

Farmall 140 Specifications

General Specifications
Model Farmall 140
Length 2,710 mm (106.7 in)
Width
Height 2,100 mm (82.7 in)
Wheel base 1,800 mm (70.9 in)
Weight 1,360 kg (2,998 lbs)
Fuel tank capacity 41.6 liters (11 US gal.; 9.2 Imp. gal)
Battery 6V (early), 12V (later)
Cabin type Open operator station
Engine
Engine model International Harvester C-123
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 2.0 L, 2,010 cm2, (122.7 cu·in)
Bore and stroke 79.0 mm X 102.0 mm (3.11 in X 4.02 in)
Compression ratio 6.9:1
Horsepower 21.4 PS (15.7 kW; 21.1 HP) at rpm
Starter Electric
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 14.4 L (15.2 US. qt, 12.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Differential contracting band
Transmission model
Transmission type Sliding gear
Gears 4 forward and 1 reverse
Speed Forward: 20.6 kmh (12.8 mph) Reverse: 5.0 (3.1 mph)
Tires
Front tires Ag: 5.00-15
Rear tires Ag: 11.2-24
Rear Hitch
Caterogy IH Fast Hitch (one-point)
PTO (Power take-off shaft)
Rear PTO type Transmission
Rear PTO speed 540 rpm