Fiat 44-28

tThe Fiat 44-28 is a four-wheel drive (4WD) tractor from the 44 series. This tractor was manufactured by Versatile for Fiat in Winnipeg, Manitoba, Canada from 1979 to 1982. The Fiat 44-28 is equipped with a 14.0 L (854.9 cu·in) six-cylinder diesel engine and a helical gears transmission with 12 forward and 3 reverse gears.

The Fiat 44-28 four-wheel drive tractor used the Cummins NT855 engine. It is a 14.0 L, 14,010 cm2, (855.0 cu·in) six-cylinder turbocharged diesel engine with 140.0 mm (5.51 in) of the cylinder bore and 152.0 mm (5.98 in) of the piston stroke. This engine produced 284 PS (208.8 kW; 280.0 HP) at 2,100 rpm of output power.

Fiat 44-28 Specifications

General Specifications
Model Fiat 44-28
Length 6,430 mm (253.1 in)
Width 2,400 mm (94.5 in)
Height 3,290 mm (129.5 in)
Wheel base 3,290 mm (129.5 in)
Ground clearance 584 mm (23.0 in)
Weight 12,550 kg (27,668 lbs)
Fuel tank capacity 700.0 liters (184.9 US gal.; 154 Imp. gal)
Battery 12V, 204Ah
Cabin type Cab with air-conditioning
Engine model Cummins NT855
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 14.0 L, 14,010 cm2, (855.0 cu·in)
Bore and stroke 140.0 mm X 152.0 mm (5.51 in X 5.98 in)
Horsepower 284 PS (208.8 kW; 280.0 HP) at 2,100 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Articulated frame
Transmission model
Transmission type Helical gears
Gears 12 forward and 3 reverse
Speed Forward: 23.0 kmh (14.3 mph) Reverse: 8.4 (5.2 mph)
Front tires Ag: 18.4-38
Rear tires Ag: 18.4-38
Three-Point Hitch
Caterogy IV
Control type Position control
Lift capacity (at ends) 9,800 kg (21,610 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type
Pressure 2233 psi (154 bar)
Pump flow 23.8 gpm (90.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.