Fiat 450

Fiat 450The Fiat 450 is a 2WD (450) or 4WD (450DT) tractor manufactured by Fiat from 1968 to 1981. The Fiat 450 is equipped with a 2.3 L (142.8 cu·in) three-cylinder diesel engine and one of two transmissions: a gear type transmission with 8 forward and 2 reverse gears or a partially synchronized transmission with dry disc clutch and 9 forward and 3 reverse gears.

The Fiat 450 utility tractor used the Fiat 8035 engine. It is a 2.3 L, 2,340 cm2, (142.8 cu·in) three-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 45.7 PS (33.6 kW; 45.0 HP) at 2,400 rpm of output power.

The Fiat 450 is equipped with manual or power (optional) steering, mechanical band brakes, open operator station or Cab (optional), and 54.0 liters (14.3 US gal.; 11.9 Imp. gal) fuel tank.

Fiat 450 Specifications

General Specifications
Model Fiat 450
Length 3,130 mm (123.2 in)
Width
Height (hood) 1,370 mm (53.9 in)
Wheel base 1,950 mm (76.8 in)
Weight 2WD: 1,760 kg (3,880 lbs)
4WD: 2,195 kg (4,840 lbs)
Fuel tank capacity 54.0 liters (14.3 US gal.; 11.9 Imp. gal)
Battery 12V
Cabin type Open operator station or Cab (optional)
Engine
Engine model Fiat 8035
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.3 L, 2,340 cm2, (142.8 cu·in)
Bore and stroke 95.0 mm X 110.0 mm (3.74 in X 4.33 in)
Compression ratio 17.0:1
Horsepower 45.7 PS (33.6 kW; 45.0 HP) at 2,400 rpm
Torque 160.0 N·m (16.3 kg·m, 117.9 ft·lb) at 1,400 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual or power (optional)
Brakes Mechanical band
Differential lock Mechanical rear
Transmission model
Transmission type Gear type
Gears 8 forward and 2 reverse
Speed Forward: 24.2 kmh (15 mph) Reverse: 12.2 (7.6 mph)
Transmission model
Transmission type Partially synchronized with dry disc clutch
Gears 9 forward and 3 reverse
Speed Forward: 23.4 kmh (14.5 mph) Reverse: 12.1 (7.5 mph)
Tires
Front tires Ag: 6.00-16 (2WD), 7.50-20 (4WD)
Rear tires Ag: 12.4/11-28
Three-Point Hitch
Caterogy II/I
Control type Position and draft control
Lift capacity (at ends) 1,400 kg (3,090 lbs)
PTO (Power take-off shaft)
Rear PTO type Live
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pressure 2135 psi (147.2 bar)
Pump flow 5.75 gpm (21.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*