Honda Harmony H2013

Honda H2013The Honda Harmony 2013 is a lawn tractor with small vertical general-purpose Honda GXV390 engine (389 cc, 23.7 cu-in) and 974 mm (38 in.) belt driven twin blade mower deck that is adjustable for cutting heights between 25 mm (1 in.) and 96 mm (4 in). The Honda H2013 lawn tractor was produced from 1995 through 1998.

The Honda GXV390 is air-cooled single-cylinder four-stroke gasoline engine with vertical PTO shaft. The GXV390 engine has a OHV design with two valves; sophisticated air intake system and multi-chamber exhaust system. An 88.0 mm (3.46 in) cylinder bore and 64.0 mm (2.5 in) piston stroke give the motor a total of 389 cc (23.7 cu-in) of displacement. Compression ratio rating is 7.7:1. The Honda GXV390 motor produces 13.0 HP (9.7 kW) at 3,600 rpm and 28.0 Nm (2.8 kg·m, 20.3 ft·lb) of torque at 2,500 rpm.

The Honda H2013 is available in two versions:

  • H2013SDA – model with gear transmission and side-discharge;
  • H2013HDA – model hydrostatic transmission and side-discharge;

The gear type transmission uses parallel shaft, constant mesh and sliding key. The gear transmission has five forward gears from 2.4 km/h to 7.3 km/h (1.5 mph to 4.5 mph), neutral gear and single reverse gear 3.6 km/h (2.2 mph).

The hydrostatic transmission has three approximate ground speeds: Reverse from 0 to 3.6 km/h (0-2.2 mph), Mowing from 0 to 5.2 km/h (0-3.2 mph) and Transport from 5.2 to 7.3 km/h (3.2-4.5 mph)

HONDA HARMONY H2013 SPECIFICATIONS

General Specifications
Model Honda H2013SDA / H2013HDA
Length: SDA: 1670 mm (66 in)
HDA: 1700 mm (67 in)
Width: 921 mm (36 in)
Height: 1030 mm (40.5 in)
Wheel base 1135 mm (45.0 in.)
Dry weight (without tines) H2013SDA: 154.0 kg (340.0 lbs)
H2013HDA: 170.0 kg (375.0 lbs)
Front tires size 13×6.5-6
Front tires pressure 98 kPa (1.0 kg/cm2, 14 psi)
Rear tires size 18×8.5-8
Rear tires pressure 69 kPa (0.7 kg/cm2, 10 psi)
Engine
Engine model Honda GXV390
Displacement 389 cm3 (23.7 cu-in)
Bore x stroke 88.0 X 64.0 mm (3.46 x 2.5 in)
Max. horsepower 13.0 HP (9.7 kW) at 3600 rpm
Max. torque 28.0 Nm (2.8 kg·m, 20.3 ft·lb) at 2,500 rpm
Carburetor Horizontal type, butterfly valve
Cooling system Forced-air
Ignition system Transistorized magneto ignition
Lubricating system Pressure and splash
Starting system Electric starter
Stoping system Ignition primary circuit ground
Fuel used Unleaded gasoline (octane number 86 or higher)
Fuel tank capacity 5.3 l (1.3 US gal.)
Spark plug NGK: BPR5ES
NIPPONDENSO: W16EPR-U
Oil type Honda 4-stroke or an equivalent (SF or SG)
Recommended oil SAE 10W-30
Oil capacity 1.1 L (1.2 US gal, 1.0 lmp qt)
Gear type transmission
Gear type Parallel shaft, constant mesh, sliding key
Gear selections Five forward, one reverse
Groung speeds First: 2.4 km/h (1.4 mph)
Second: 3.1 km/h (2.0 mph)
Third: 4.9 km/h (3.0 mph)
Fourth: 6.2 km/h (3.9 mph)
Fifth: 7.3 km/h (4.5 mph)
Reverse: 3.6 km/h (2.3 mph)

Hydrostatic type transmission
Hydrostatic type Hydrostatic,fluid drive
Groung speeds Reverse: 0-3.4 km/h (0-2.1 mph)
Mowing: 0-5.2 km/h (0-3.2 mph)
Transport: 5.2-7.3 km/h (3.3-4.5 mph)
Mower Deck
Type Twin blade, belt drive, four-point link, dual anti-scalp rollers, side discharge model
Deck size 974 mm (38 in.)
Height range 25-96 mm (1-4 in.)
Blade brake Mechanical Arms
Adjustments Left-right and front-rear, height adjustment splus anti-scalp roller height adjustments