International 1468 row-crop tractor: review and specs

The International Harvester 1468 is a 2WD row-crop tractor from the 66 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1971 to 1974. The International Harvester 1468 is equipped with a 9.0 L (548.7 cu·in) V8 diesel engine and one of two transmissions: a gear type transmission with 8 forward and 4 reverse gears or a two-speed power shift transmission with 16 forward and 8 reverse gears.

The International Harvester 1468 row-crop tractor used the International DV-550 engine. It is a 9.0 L, 8,992 cm², (548.7 cu·in) V8 turbocharged diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 147 PS (108.1 kW; 145.0 HP) at 2,600 rpm of output power.

International Harvester 1468 Specifications

General Specifications
Model	International Harvester 1468
Length	–
Width	–
Height	–
Wheel base	–
Weight	5,375 kg (11,850 lbs)
Fuel tank capacity	–
Battery	–
Cabin type	Cab (standard)
Engine
Engine model	International DV-550
Engine type	Four-stroke, liquid-cooled, V
Cylinders	8
Fuel type	Diesel
Displacement	9.0 L, 8,992 cm², (548.7 cu·in)
Bore and stroke	114.0 mm X 110.0 mm (4.49 in X 4.33 in)
Horsepower	147 PS (108.1 kW; 145 HP) at 2,600 rpm
Starter	Electric

Transmission and chassis
Chassis	4×2 2WD
Steering type	–
Brakes	–
Transmission model	–
Transmission type	Gear type
Gears	8 forward and 4 reverse
Transmission model	Torque Amplifier
Transmission type	Two-speed power shift
Gears	16 forward and 8 reverse
Tires
Front tires	Ag: 11L-16
Rear tires	Ag: 18.4-38

Three-Point Hitch
Caterogy	III/II
Control type	–
Lift capacity (at ends)	–
PTO (Power take-off shaft)
Rear PTO type	Independent
Rear PTO speed	1,000 rpm
Hydraulic system
Hydraulic type	–
Hydraulic capacity	45.4 liters (12.0 US gal, 10.0 Imp. gal)

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.