International Harvester 3414

International Harvester 3414The International Harvester 3414 is a 2WD industrial tractor from the series. This tractor was manufactured by International Harvester in from 1961 to 1968.

The International Harvester 3414 is equipped with one of two engines: a 2.4 L (144.0 cu·in) four-cylinder gasoline engine or a 2.5 L (154.0 cu·in) four-cylinder diesel engine and three variants of transmission.

The tractor could be equipped with the following engines:

  • International Harvester BC-144. It is a 2.4 L, 2,360 cm2, (144.0 cu·in) four-cylinder natural aspirated gasoline engine with 86.0 mm (3.39 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 6.3:1. This engine produced 44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm of output power and 157.3 N·m (16 kg·m, 115.9 ft·lb) at 1,800 rpm of torque.
  • International Harvester BD-154. It is a 2.5 L, 2,524 cm2, (154.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 89.0 mm (3.5 in) and the piston stroke is 102.0 mm (4.02 in). The compression ratio rating is 22.6:1. This engine produced 44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm of output power and 157.3 N·m (16 kg·m, 115.9 ft·lb) at 1,400 rpm.

The IH 3414 is equipped with hydrostatic power steering, differential mechanical disc brakes, open operator station or a cab, and 52.0 liters (13.7 US gal.; 11.4 Imp. gal) fuel tank.

Following attachments are available for the International Harvester 3414 industrial tractor:

  • International loader
  • International 3150 backhoe

International Harvester 3414 Specifications

General Specifications
Model International Harvester 3414
Length 2,890 mm (113.8 in)
Width 1,700 mm (66.9 in)
Height (steering wheel) 1,540 mm (60.6 in)
Wheel base 1,840 mm (72.4 in)
Ground clearance 330 mm (13 in)
Weight (shipping) 2,360 kg (5,203 lbs)
Fuel tank capacity 52.0 liters (13.7 US gal.; 11.4 Imp. gal)
Battery
Cabin type Open operator station or a cab
Engine
Engine model International Harvester BC-144
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 2.4 L, 2,360 cm2, (144.0 cu·in)
Bore and stroke 86.0 mm X 102.0 mm (3.39 in X 4.02 in)
Compression ratio 6.3:1
Horsepower 44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm
Torque 157.3 N·m (16 kg·m, 115.9 ft·lb) at 1,800 rpm
Starter Electric
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 9.5 L (10 US. qt, 8.4 Imp. qt.)
Engine
Engine model International Harvester BD-154
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.5 L, 2,524 cm2, (154.0 cu·in)
Bore and stroke 89.0 mm X 102.0 mm (3.5 in X 4.02 in)
Compression ratio 22.6:1
Horsepower 44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm
Torque 157.3 N·m (16 kg·m, 115.9 ft·lb) at 1,400 rpm
Starter Electric
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 9.5 L (10 US. qt, 8.4 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Hydrostatic power
Brakes Differential mechanical disc
Transmission model
Transmission type
Gears 8 forward and 2 reverse
Speed Forward: 23.2 kmh (14.4 mph) Reverse: 9.7 (6 mph)
Transmission oil capacity 18.9 L (5 US. gal, 4.2 Imp. gal.)
Transmission model
Transmission type
Gears 8 forward and 8 reverse
Speed Forward: 23.2 kmh (14.4 mph) Reverse: 29.3 (18.2 mph)
Transmission oil capacity 18.9 L (5 US. gal, 4.2 Imp. gal.)
Transmission model Torque Converter
Transmission type
Gears 6 forward and 6 reverse
Speed Forward: 20.6 kmh (12.8 mph) Reverse: 25.7 (16 mph)
Transmission oil capacity 18.9 L (5 US. gal, 4.2 Imp. gal.)
Tires
Front tires Industrial: 7.50-16
Rear tires Industrial: 14.9-24
Three-Point Hitch
Category I
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Continuous
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity 20.8 L (5.5 US. gal, 4.6 Imp. gal.)
With 3-point hitch: 32.2 L (8.5 US gal, 7.1 Imp. gal.)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*