The International Harvester 3588 is a 4WD four-wheel drive tractor from the 30 2+2 series. This tractor was manufactured by International Harvester from 1978 to 1981. The International Harvester 3588 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and a two-range power shift transmission with 16 forward and 8 reverse gears.
The International Harvester 3588 four-wheel drive used the International Harvester engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 109.0 mm (4.29 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. This engine produced 152.6 PS (112.2 kW; 150.5 HP) at 2,400 rpm of PTO output power.
The International Harvester 3588 is equipped with power steering, cab, and 340.7 liters (90 US gal.; 74.9 Imp. gal) fuel tank.
International Harvester 3588 Specifications
| General Specifications | |
| Model | International Harvester 3588 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,790 mm (109.8 in) |
| Ground clearance | – |
| Weight (operating) | 7,990 kg (17,615 lbs) |
| Fuel tank capacity | 340.7 liters (90 US gal.; 74.9 Imp. gal) |
| Battery | 12V |
| Cabin type | Cab |
| Engine | |
| Engine model | International Harvester |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 7.6 L, 7,636 cm2, (466.0 cu·in) |
| Bore and stroke | 109.0 mm X 136.0 mm (4.29 in X 5.35 in) |
| Horsepower | 152.6 PS (112.2 kW; 150.5 HP) at 2,400 rpm |
| Starter | Electric |
| Coolant capacity: | 32.2 L (34 US. qt, 28.3 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 4WD |
| Steering type | Power |
| Brakes | – |
| Transmission model | – |
| Transmission type | Two-range power shift |
| Gears | 16 forward and 8 reverse |
| Speed | Forward: 32.8 kmh (20.4 mph) Reverse: 16.1 (10 mph) |
| Transmission oil capacity | 89.4 L (23.6 US. gal, 19.7 Imp. gal.) |
| Tires | |
| Front tires | Ag: 18.4-38 |
| Rear tires | Ag: 18.4-38 |
| Three-Point Hitch | |
| Category | III |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Valves | 2 |
| Pump flow | 12.0 gpm (45.4 lpm) |
Be the first to comment