Iseki SX75

Iseki SX75The Iseki SX75 is a 2WD/4WD utility tractor from the SX series. This tractor was manufactured by the Iseki in Japan from 1985 to 1990. The Iseki SX75 is equipped with 3.9 L four-cylinder diesel engine and synchromesh transmission (12 forward and 4 reverse gears) with dry disc clutch.

The Iseki SX75 utility tractor used 3.9 L, 3,855 cm2, (235 cu·in) four-cylinder Isuzu 4BD1 diesel engine with 102.0 mm (4.02 in) of cylinder bore and 118.0 mm (4.65 in) of piston stroke. The engine utilizes an open combustion chamber design with direct fuel injection. This engine produced 71 PS (52.2 kW; 70 HP) of maximum output power.

The Iseki SX75 is equipped with hydraulic power steering, wet disc brakes, four-post ROPS (cab with air-conditioning was available as an option) and 85 liters (22.5 US gal.; 18.7 Imp. gal) fuel tank for ROPS version and 105 liters (27.7 US gal.; 23.1 Imp. gal) for cab version.

Iseki SX75 Specifications

General Specifications
ModelIseki SX75
Length3,880 mm (152.8 in)
Height2,640 mm (103.9 in)
Wheel base 2WD: 2,230 mm (87.8 in)
4WD: 2,250 mm (88.6 in)
Weight3,410 kg (7,518 lbs)
Fuel tank capacity ROPS: 85 liters (22.5 US gal.; 18.7 Imp. gal)
Cab: 105 liters (27.7 US gal.; 23.1 Imp. gal)
Battery12V 110A
Cabin typeFour-post ROPS. Cab with air-conditioning (option).
Engine modelIsuzu 4BD1
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement3.9 L, 3,855 cm2, (235 cu·in)
Bore and stroke102.0 mm X 118.0 mm (4.02 in X 4.65 in)
Horsepower71 PS (52.2 kW; 70 HP)
Oil capacity:13.0 L (13.74 US. qt, 11.44 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydraulic power
BrakesWet disc
Transmission model
Transmission typeSynchromesh with dry disc clutch
Gears12 forward and 4 reverse
Speed Forward: 32.7 kmh (20.3 mph) Reverse: 11.7 (7.3 mph)
Front tires2WD: 10.00-16; 4WD: 11.2-24
Rear tires2WD/4WD: 18.4-30
Three-Point Hitch
Control typePosition and draft control
Lift capacity3,100 kg (6,836 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO spped540/1000 rpm
Hydraulic system
Hydraulic type
Pump flow13.2 gpm (50 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.