David Brown 1410

David Brown 1410The David Brown 1410 is a 2WD utility tractor manufactured by David Brown in Meltham Mills, Huddersfield, England from 1974 to 1979. The David Brown 1410 is equipped with 3.6 L, four-cylinder diesel engine and partially synchronized transmission with 12 forward and 4 reverse gears.

The David Brown 1410 utility tractor used 3.6 L, 3593 cm2, (219.26 cu·in) four-cylinder turbocharged diesel engine with 100.0 mm (3.94 in) of cylinder bore and 114.0 mm (4.49 in) of piston stroke. The compression ratio rating is 16.0:1. This engine produced 92.5 PS (68 kW; 91.2 HP) at 2,300 rpm of maximum output power. The David Brown 1410 is equipped with hydrostatic power steering, differential wet disc brakes, open operator station, (Cabin was available as an option) and 80 liters (21.1 US gal.; 17.6 Imp. gal) fuel tank.

David Brown 1410 Specifications

General Specifications
Model David Brown 1410
Length 3,680 mm (144.9 in)
Width 1,950 mm (76.8 in)
Height 2,610 mm (103 in)
Wheel base 2,280 mm (89.8 in)
Weight 3,474 kg (7659 lbs)
Fuel tank capacity 80 liters (21.1 US gal.; 17.6 Imp. gal)
Battery 12V 100A
Cabin type Open operator station, Cab optional.
Engine
Engine model David Brown
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.6 L, 3,593 cm2, (219.26 cu·in)
Bore and stroke 100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio 16.0:1
Horsepower 92.5 PS (68 kW; 91.2 HP) at 2,300 rpm
Starter Electric
Oil capacity: 15.0 L (15.85 US. qt, 13.2 Imp. qt.)
Coolant capacity: 14.2 L (15 US. qt, 12.49 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Hydrostatic power
Brakes Differential wet disc
Transmission model
Transmission type Partially synchronized
Gears 12 forward and 4 reverse
Tires
Front tires 7.50-16, 6.00-19
Rear tires 16.9/14-34, 12.4/11-36, 13.6/12-36
Three-Point Hitch
Caterogy II
Control type
Lift capacity 2040 kg (4498 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540/1000 rpm
Hydraulic system
Hydraulic type Gear pump
Pressure 2000 psi (137.9 bar)
Pump flow 6.5 gpm (24.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*