J.I. Case 1170

J.I. Case 1170The J.I. Case 1170 is a 2WD row-crop tractor manufactured by J.I. Case in Racine, Wisconsin, USA from 1970 to 1971. The J.I. Case 1170 is equipped with a 7.4 L (451.0 cu·in) six-cylinder diesel engine and one of two transmissions: a transmission with 8 forward and 2 reverse gears or a transmission with 12 forward and 3 reverse gears.

The J.I. Case 1170 row-crop tractor used the J.I. Case engine. It is a 7.4 L, 7,390 cm2, (451.0 cu·in) six-cylinder turbocharged diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 123.8 PS (91.0 kW; 122.0 HP) at 2,100 rpm of PTO output power.

The J.I. Case 1170 is equipped with power steering, hydraulic disc brakes, open operator station or cab (optional) and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.

J.I. Case 1170 Specifications

General Specifications
Model J.I. Case 1170
Length 4,360 mm (171.7 in)
Width
Height (hood) 1,980 mm (78 in)
Wheel base 2,790 mm (109.8 in)
Ground clearance (drawbar) 500 mm (19.7 in)
Weight 6,260 kg (13,801 lbs)
Fuel tank capacity 189.3 liters (50 US gal.; 41.6 Imp. gal)
Battery 12V
Cabin type Open operator station or Cab (optional)
Engine
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.4 L, 7,390 cm2, (451.0 cu·in)
Bore and stroke 111.0 mm X 127.0 mm (4.37 in X 5 in)
Compression ratio 16.5:1
Horsepower 123.8 PS (91.0 kW; 122.0 HP) at 2,100 rpm
Starter Electric
Coolant capacity: 37.9 L (40 US. qt, 33.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Hydraulic disc
Transmission model
Transmission type
Gears 8 forward and 2 reverse
Speed Forward: 24.1 kmh (15 mph) Reverse: 12.2 kmh (7.6 mph)
Transmission model
Transmission type
Gears 12 forward and 3 reverse
Tires
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-38
Three-Point Hitch
Category II
Control type Lower-link draft control
Lift capacity 2,720 kg (5,998 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000 (1.375), 540/1000 rpm
Hydraulic system
Hydraulic type
Pressure 2100 psi (144.8 bar)
Valves 2
Pump flow 16.0 gpm (60.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*