John Deere 310C

John Deere 310CThe John Deere 310C is a 2WD or 4WD backhoe loader tractor manufactured by John Deere from 1986 to 1991. The John Deere 310C is equipped with a 4.5 L (276 cu·in) four-cylinder diesel engine and a transmission with 4 forward and 4 reverse gears.

The John Deere 310C backhoe loader tractor used the John Deere engine. It is a 4.5 L, 4,522 cm2, (276 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 76.0 PS (55.9 kW; 75.0 HP) at 2,200 rpm of output power.

The JD 310C is equipped with hydrostatic power steering, cab (standard), and 87.0 liters (23 US gal.; 19.1 Imp. gal) fuel tank and 143.8 liters (38 US gal, 31.6 Imp. gal) with aux tank.

John Deere 310C Specifications

General Specifications
Model John Deere 310C
Length 7,130 mm (280.7 in)
Width 2,080 mm (81.9 in)
Wheel base
Weight 5,624 kg (12,399 lbs)
Fuel tank capacity 87.0 liters (23 US gal.; 19.1 Imp. gal)
With aux tank: 143.8 liters (38 US gal.; 31.6 Imp. gal)
Battery 12V
Cabin type Cab (standard)
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.5 L, 4,522 cm2, (276 cu·in)
Bore and stroke 106.0 mm X 127.0 mm (4.17 in X 5 in)
Horsepower 76 PS (55.9 kW; 75 HP) at 2,200 rpm
Torque 301.0 N·m (30.7 kg·m, 221.8 ft·lb) at 1,300 rpm
Starter Electric
Oil capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: 13.2 L (13.9 US. qt, 11.6 Imp. qt.)
With heater: 15.1 L (16.0 US. qt, 13.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Transmission model
Transmission type
Gears 4 forward and 4 reverse
Speed Forward: 36.0 kmh (22.4 mph) Reverse: 32.5 (20.2 mph)
Transmission oil capacity 2WD: 37.9 L (10.0 US gal, 8.3 Imp. gal.)
4WD: 43.5 L (11.5 US gal, 9.6 Imp. gal.)
Front tires
Rear tires
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 79.5 liters (21 US gal, 17.5 Imp. gal)
Pressure 2755 psi (189.9 bar)
Total flow 35.0 gpm (132.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.