Cub Cadet LT 2180

Cub Cadet LT 2180The Cub Cadet LT 2180 is a 2WD lawn tractor manufactured by Cub Cadet (a part of MTD) during 2004. The Cub Cadet LT 2180 is equipped with a 0.6 L (34.7 cu·in) two-cylinder gasoline engine and a shaft-driven hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet LT2180 lawn tractor used the Briggs & Stratton Vanguard engine. It is a 0.6 L, 568 cm2, (34.7 cu·in) V-twin natural aspirated gasoline engine with 72.0 mm (2.83 in) of the cylinder bore and 70.0 mm (2.76 in) of the piston stroke. This engine produced 18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm of output power.

The Cub Cadet LT 2180 is equipped with manual steering, internal expanding brakes, an open operator station, 7.9 liters (2.1 US gal.; 1.7 Imp. gal) fuel tank, and mid-mount 1,060 mm (42 in) mower deck with manual lift.

Cub Cadet LT 2180 Specifications

General Specifications
Model Cub Cadet LT2180
Length 1,820 mm (71.7 in)
Width 1,290 mm (50.8 in)
Height 1,060 mm (41.7 in)
Wheel base 1,190 mm (46.9 in)
Ground clearance 150 mm (5.9 in)
Weight
Fuel tank capacity 7.9 liters (2.1 US gal.; 1.7 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model Briggs & Stratton Vanguard
Engine type Four-stroke, air-cooled
Cylinders 2
Fuel type Gasoline
Displacement 0.6 L, 568 cm2, (34.7 cu·in)
Bore and stroke 72.0 mm X 70.0 mm (2.83 in X 2.76 in)
Horsepower 18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm
Starter Electric
Oil type SAE 5W-20, 10W-30
Oil capacity: 1.4 L (1.5 US. qt, 1.2 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Internal expanding
Transmission model
Transmission type Shaft-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 9.7 kmh (6 mph) Reverse: 4.8 kmh (3 mph)
Transmission oil capacity 5.7 L (1.5 US. gal, 1.3 Imp. gal.)
Tires
Front tires Lawn/turf: 15×6-6
Rear tires Lawn/turf: 20×9-8
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO speed