John Deere 3203

John Deere 3203The John Deere 3203 is a 4WD compact utility tractor manufactured by the John Deere in Augusta, Georgia, USA from 2006 to 2008. The JD 3203 is equipped with a 1.5 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The John Deere 3203 compact utility tractor used the Yanmar 3TNV84 engine. It is a 1.5 L, 1,496 cm2, (91.3 cu·in) three-cylinder natural aspirated diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 32.5 PS (23.9 kW; 32.0 HP) at 2,800 rpm of horsepower and 100.0 N·m (10.2 kg·m, 73.7 ft·lb) at 1,680 rpm of torque.

The John Deere 3203 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 45.3 liters (12 US gal.; 10 Imp. gal) fuel tank.

Following attachments are available for the JD 3203 compact utility tractor:

  • John Deere 261 rear-mount mower
  • John Deere 272 rear-mount mower
  • John Deere 655 tiller
  • John Deere 665 tiller
  • John Deere 300 loader

John Deere 3203 Specifications

General Specifications
Model John Deere 3203
Length 3,050 mm (120.1 in)
Width 1,750 mm (68.9 in)
Height 2,100 mm (82.7 in)
Wheel base 1,720 mm (67.7 in)
Weight 1,224 kg (2,698 lbs)
Fuel tank capacity 45.3 liters (12 US gal.; 10 Imp. gal)
Battery 12V, CCA: 500A, Group 22NF
Cabin type Open operator station with two-post ROPS
Engine
Engine model Yanmar 3TNV84
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.5 L, 1,496 cm2, (91.3 cu·in)
Bore and stroke 84.0 mm X 90.0 mm (3.31 in X 3.54 in)
Compression ratio 19.0:1
Horsepower 32.5 PS (23.9 kW; 32.0 HP) at 2,800 rpm
Torque 100.0 N·m (10.2 kg·m, 73.7 ft·lb) at 1,680 rpm
Starter Electric
Oil capacity: 4.3 L (4.5 US. qt, 3.8 Imp. qt.)
Coolant capacity: 5.3 L (5.6 US. qt, 4.7 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Differential lock Mechanical
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 20.8 kmh (12.9 mph) Reverse: 20.1 (12.5 mph)
Tires
Front tires Ag: 25×8.50-14
Rear tires Ag: 15-19.5
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at ends) 975 kg (2,150 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with wet disc clutch
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 25.7 L (27.16 US. qt, 22.61 Imp. qt.)
Pressure 2150 psi (148.2 bar)
Valves 2
Pump flow 7.6 gpm (28.8 lpm)
Steering flow 5.7 gpm (21.6 lpm)
Total flow 13.3 gpm (50.3 lpm)