The John Deere 7210 is a 2WD or 4WD row-crop tractor from the 7010 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1997 to 2002. The John Deere 7210 is equipped with a 6.8 L (414.0 cu·in) six-cylinder diesel engine and one of four transmission variants.
The JD 7210 row-crop tractor used the John Deere PowerTech 6068 engine. It is a 6.8 L, 6,784 cm2, (414.0 cu·in) six-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 111.5 PS (82.0 kW; 110.0 HP) at 2,100 rpm of output power and 450.2 N·m (45.9 kg·m, 331.8 ft·lb) of torque.
The JD 7210 is equipped with hydrostatic power steering, hydraulic wet disc brakes, ComfortGard cab standard, and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.
John Deere 7210 Specifications
| General Specifications | |
| Model | John Deere 7210 |
| Length | 4,260 mm (167.7 in) |
| Width | 2,430 mm (95.7 in) |
| Height (cab) |
2WD: 2,830 mm (111.4 in) 4WD: 2,820 mm (111 in) |
| Wheel base |
2WD: 2,840 mm (111.8 in) 4WD: 2,620 mm (103.1 in) |
| Ground clearance |
2WD: 610 mm (24.0 in) 4WD: 530 mm (20.9 in) |
| Weight (shipping) |
2WD: 5,210 kg (11,486 lbs) 4WD: 5,600 kg (12,346 lbs) |
| Fuel tank capacity | 189.3 liters (50 US gal.; 41.6 Imp. gal) |
| Battery | 12V, CCA 925A, Group 31 |
| Cabin type | ComfortGard cab standard |
| Engine | |
| Engine model | John Deere PowerTech 6068 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 6.8 L, 6,784 cm2, (414.0 cu·in) |
| Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
| Compression ratio | 17.0:1 |
| Horsepower | 111.5 PS (82.0 kW; 110.0 HP) at 2,100 rpm |
| Torque | 450.2 N·m (45.9 kg·m, 331.8 ft·lb) |
| Starter | Electric |
| Oil capacity: | 18.9 L (20 US. qt, 16.6 Imp. qt.) |
| Coolant capacity: | 19.0 L (20.1 US. qt, 16.7 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Transmission model | John Deere SyncroPlus |
| Transmission type | Fully synchronized with wet disc clutch |
| Gears | 12 forward and 4 reverse |
| Speed | Forward: 30.4 kmh (18.9 mph) Reverse: 20.1 (12.5 mph) |
| Transmission oil capacity |
2WD: 56.8 L (15 US. gal, 12.5 Imp. gal.) 4WD: 64.4 L (17 US. gal, 14.2 Imp. gal.) |
| Transmission model | John Deere PowrQuad |
| Transmission type | Partial power shift with wet disc clutch |
| Gears | 16 forward and 16 reverse |
| Speed | Forward: 29.6 kmh (18.4 mph) Reverse: 36.0 (22.4 mph) |
| Transmission oil capacity |
2WD: 56.8 L (15 US. gal, 12.5 Imp. gal.) 4WD: 64.4 L (17 US. gal, 14.2 Imp. gal.) |
| Transmission model | John Deere PowrQuad |
| Transmission type | Partial power shift with wet disc clutch |
| Gears | 20 forward and 20 reverse |
| Transmission oil capacity |
2WD: 56.8 L (15 US. gal, 12.5 Imp. gal.) 4WD: 64.4 L (17 US. gal, 14.2 Imp. gal.) |
| Transmission model | John Deere PowrQuad Creeper |
| Transmission type | Partial power shift with wet disc clutch |
| Gears | 28 forward and 28 reverse |
| Transmission oil capacity |
2WD: 60.6 L (16 US. gal, 13.3 Imp. gal.) 4WD: 64.4 L (18 US. gal, 15.0 Imp. gal.) |
| Tires | |
| Front tires | Ag: 11.00-16 (2WD), 13.6R28 (4WD) |
| Rear tires | Ag: 18.4-38 |
| Three-Point Hitch | |
| Category | II or IIIN/II (optional) |
| Control type | – |
| Lift capacity (at ends) |
2WD: 3,355 kg (7,400 lbs) 2WD: 3,805 kg (8,390 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure flow compensated (PFC) |
| Pressure | 2900 psi (199.9 bar) |
| Valves | 2 to 4 |
| Pump flow |
26.0 gpm (98.4 lpm) 38.0 gpm (143.8 lpm) |
Be the first to comment