The John Deere 8100 is a 2WD or 4WD row-crop tractor from the 8000/8000T series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1995 to 1999.
The John Deere 8100 used one of two engines: a 7.6 L (466.0 cu·in) six-cylinder diesel engine or a 8.1 L (495.9 cu·in) six-cylinder diesel engine and a full power shift transmission with 16 forward and 4 reverse gears and hydraulic wet disc clutch.
The JD 8100 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, CommandView Cab and 511.0 liters (135 US gal.; 112.4 Imp. gal) fuel tank.
The tractor could be equipped with the following engines:
- John Deere 7.6L (1995-1996). It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 15.1:1. This engine produced 162.2 PS (119.3 kW; 160.0 HP) at 2,200 rpm of output power.
- John Deere 8.1L (1997-1999). It is a 8.1 L, 8,126 cm2, (496.0 cu·in) six-cylinder diesel engine. The cylinder bore is 116.0 mm (4.57 in) and the piston stroke is 129.0 mm (5.08 in). The compression ratio rating is 16.5:1. This engine produced 162.2 PS (119.3 kW; 160.0 HP) at 2,200 rpm of output power.
John Deere 8100 Specifications
| General Specifications | |
| Model | John Deere 8100 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2WD: 3,110 mm (122.4 in) 4WD: 2,940 mm (115.7 in) |
| Ground clearance | 2WD: 800 mm (31.5 in) 4WD: 580 mm (22.8 in) |
| Weight (shipping) | 2WD: 7,455 kg (16,435 lbs) 4WD: 8,110 kg (17,879 lbs) |
| Fuel tank capacity | 511.0 liters (135 US gal.; 112.4 Imp. gal) |
| Battery | Two 12V, CCA 925A |
| Cabin type | CommandView Cab |
| Engine (1995-1996) | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 7.6 L, 7,636 cm2, (466.0 cu·in) |
| Bore and stroke | 116.0 mm X 121.0 mm (4.57 in X 4.76 in) |
| Compression ratio | 15.1:1 |
| Horsepower | 162.2 PS (119.3 kW; 160 HP) at 2,200 rpm |
| Starter | Electric |
| Oil capacity: | 21.5 L (22.7 US. qt, 18.9 Imp. qt.) |
| Coolant capacity: | 27.3 L (28.8 US. qt, 24 Imp. qt.) |
| Engine (1997-1999) | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 8.1 L, 8,126 cm2, (495.9 cu·in) |
| Bore and stroke | 116.0 mm X 129.0 mm (4.57 in X 5.08 in) |
| Compression ratio | 16.5:1 |
| Horsepower | 162.2 PS (119.3 kW; 160 HP) at 2,200 rpm |
| Starter | Electric |
| Oil capacity: | 28.0 L (29.6 US. qt, 24.6 Imp. qt.) |
| Coolant capacity: | 28.4 L (30 US. qt, 25 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Differential hydraulic wet disc |
| Final drive | Inboard planetary |
| Differential lock | Electro-hydraulic |
| Transmission model | John Deere PowerShift |
| Transmission type | Full power shift with hydraulic wet disc clutch |
| Gears | 16 forward and 4 reverse |
| Speed | Forward: 34.0 kmh (21.1 mph) Reverse: 10.4 kmh (6.5 mph) |
| Transmission oil capacity | 140.0 L (37 US. gal, 30.8 Imp. gal.) |
| Tires | |
| Front tires | Ag: 11.00-24 |
| Rear tires | Ag: 18.4R46 |
| Three-Point Hitch | |
| Category | III/IIIN |
| Control type | Electro-hydraulic draft sensing |
| Lift capacity (at ends) | 4,717 kg (10,401 lbs) Optional: 6,425 kg (14,165 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1000, 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure-flow compensated (PFC) |
| Hydraulic capacity | 140.0 L (37 US. gal, 30.8 Imp. gal.) |
| Pressure | 2900 psi (199.9 bar) |
| Valves | 3 to 5 |
| Pump flow | 30.0 gpm (113.6 lpm) |
Be the first to comment