Kubota B1220

Kubota B1220DThe Kubota B1220D is a 4WD compact utility tractor manufactured by the Kubota. The Kubota B1220D is equipped with a 0.5 L two-cylinder diesel engine and gear shift transmission with dry single-plate type clutch (6 forward and 2 reverse gears).

The Kubota B1220D utility tractor used the Kubota Z482-D25 engine. It is a 0.5 L, 479 cm2, (29.2 cu·in) two-cylinder natural aspirated diesel engine with 67.0 mm (2.64 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke. This engine produced 12 PS (8.8 kW; 11.8 HP) at 3,100 rpm of gross output power and 9.5 PS (7.0 KW; 9.4 HP) of PTO horsepower.

The Kubota B1220D is equipped with manual steering, wet disc type brakes, open operator station and 14.0 liters (3.7 US gal.; 3.1 Imp. gal) fuel tank.

Kubota B1220D Specifications

General Specifications
Model Kubota B1220D
Length 2,360 mm (92.9 in)
Width 932 mm (36.7 in)
Height 1,235 mm (48.6 in)
Wheel base 1,270 mm (50 in)
Weight 460 kg (1,014 lbs)
Fuel tank capacity 14.0 liters (3.7 US gal.; 3.1 Imp. gal)
Battery 12V CCA: 400A
Cabin type Open operator station
Engine model Kubota Z482-D25
Engine type Four-stroke, liquid-cooled, inline
Cylinders 2
Fuel type Diesel
Displacement 0.5 L, 479 cm2, (29.3 cu·in)
Bore and stroke 67.0 mm X 68.0 mm (2.64 in X 2.68 in)
Horsepower 12 PS (8.8 kW; 11.8 HP) at 3,100 rpm
Torque 27.7 N·m (2.8 kg·m, 20.4 ft·lb)
Starter Electric
Oil capacity: 1.6 L (1.69 US. qt, 1.41 Imp. qt.)
Coolant capacity: 3.4 L (3.59 US. qt, 2.99 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Manual
Brakes Wet disc type
Transmission model
Transmission type Gear shift with dry single plate type clutch
Gears 6 forward and 2 reverse
Speed Forward: 15.1 kmh (9.4 mph) Reverse: 6.2 (3.9 mph)
Transmission oil capacity 10.5 L (11.1 US. qt, 9.24 Imp. qt.)
Front tires Ag: 4.5-10
Rear tires Ag: 7-16
Three-Point Hitch
Caterogy I
Control type Up and down type control valve
Lift capacity 430 kg (948 lbs)
PTO (Power take-off shaft)
Rear PTO type
Rear PTO spped 540/1000 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity 10.5 L (11.1 US. qt, 9.24 Imp. qt.)
Pump flow 3.72 gpm (14.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.