New Holland TC40

New Holland TC40The New Holland TC40 is a 2WD or 4WD compact utility tractor from the TC series. This tractor was manufactured by New Holland from 2001 to 2003. The New Holland TC40 is equipped with a 2.0 L (121.7 cu·in) four-cylinder diesel engine and one of two transmissions: a synch shuttle transmission with 12 forward and 12 reverse gears or a hydrostatic transmission with infinite (2-range) forward and reverse gears.

This tractor was available in two variants: the TC40 – base model and the TC40D – deluxe model.

The New Holland TC40 compact utility tractor used the Shibaura N844 engine. It is a 2.0 L, 1,994 cm2, (121.7 cu·in) four-cylinder natural aspirated diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 22.5:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 2,600 rpm of output power.

The New Holland TC40 is equipped with power steering, two-post foldable ROPS, and 27.0 liters (7.1 US gal.; 5.9 Imp. gal) fuel tank.

Following attachments are available for the New Holland TC40 compact utility tractor:

  • New Holland 16LA loader
  • New Holland 17LA loader

New Holland TC40 Specifications

General Specifications
Model New Holland TC40
Length 3,180 mm (125.2 in)
Width 1,550 mm (61 in)
Height 2,410 mm (94.9 in)
Wheel base 1,860 mm (73.2 in)
Ground clearance 350 mm (13.8 in)
Weight 2WD: 1,360 kg (2,998 lbs)
4WD: 1,425 kg (3,145 lbs)
Fuel tank capacity 27.0 liters (7.1 US gal.; 5.9 Imp. gal)
Battery 12V
Cabin type Two-post foldable ROPS
Engine
Engine model Shibaura N844
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.0 L, 1,994 cm2, (121.7 cu·in)
Bore and stroke 84.0 mm X 90.0 mm (3.31 in X 3.54 in)
Compression ratio 22.5:1
Horsepower 40.5 PS (29.8 kW; 40.0 HP) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes
Transmission model
Transmission type Synch shuttle
Gears 12 forward and 12 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Tires
Front tires Ag: 5.50×16, 7.5Lx15 (2WD), 7×16, 8×16 (4WD)
Rear tires Ag: 13.6×24, 14.9×24
Three-Point Hitch
Caterogy I
Control type
Lift capacity 740 kg (1632 lbs)
PTO (Power take-off shaft)
Middle PTO type Optional
Middle PTO speed 2,000 rpm
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pump flow 9.8 gpm (37.1 lpm)
Steering flow 5.1 gpm (19.3 lpm)
Total flow 14.9 gpm (56.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*