New Holland 1530

New Holland 1530The New Holland 1530 is a 2WD/4WD compact utility tractor from the Boomer series. This tractor was manufactured by Shibaura for distributor New Holland from 1997 to 1999. The New Holland 1530 is equipped with a 1.3 L (81.2 cu·in) three-cylinder diesel engine and one of two transmissions: a sliding gear transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The NH 1530 compact utility tractor used the Shibaura engine. It is a 1.3 L, 1,330 cm2, (81.2 cu·in) three-cylinder natural aspirated diesel engine. This engine produced 25.3 PS (18.6 kW; 25.0 HP) at 2,600 rpm of output power.

The New Holland 1530 is equipped with hydrostatic power or supersteer (optional) steering, wet disc brakes, two-post fixed ROPS or foldable ROPS (optional) and 27.6 liters (7.3 US gal.; 6.1 Imp. gal) fuel tank.

Following attachments are available for the New Holland 1530 compact utility tractor:

  • Mid-mount New Holland 914A 60: 1,520 mm (60 inches) mower deck
  • Mid-mount New Holland 914A 72: 1,820 mm (72 inches) mower deck
  • Front-mount New Holland 702C: 1,780 mm (78 inches) blade
  • Front-mount New Holland 716B: 1,520 mm (60 inches) snow blower
  • New Holland 7308 loader
  • New Holland 757C backhoe

New Holland 1530 Specifications

General Specifications
Model New Holland 1530
Length 2WD: 2,700 mm (106.3 in)
4WD: 2,690 mm (105.9 in)
Width 1,370 mm (53.9 in)
Height (ROPS) 2,230 mm (87.8 in)
Wheel base 1,600 mm (63 in)
Ground clearance (4WD) 380 mm (15.0 in)
Weight (shipping) 2WD: 1,050 kg (2,315 lbs)
4WD: 1,125 kg (2,480 lbs)
Fuel tank capacity 27.6 liters (7.3 US gal.; 6.1 Imp. gal)
Battery 12V
Cabin type Two-post fixed ROPS or foldable ROPS (optional)
Engine
Engine model Shibaura
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,330 cm2, (81.2 cu·in)
Bore and stroke mm X mm (0 in X 0 in)
Horsepower 25.3 PS (18.6 kW; 25.0 HP) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power or SuperSteer (optional)
Brakes Wet disc
Final drive Spur gear
Transmission model
Transmission type Sliding gear with dry disc clutch
Gears 9 forward and 3 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Tires
Front tires Ag: 5.50×16 (2WD), 7×14 (4WD)
Lawn/turf: 23×8.50-12 (2WD), 25×8.50-14 (4WD)
Industrial: 25×8.50-14
Rear tires Ag: 11.2×24
Lawn/turf: 13.6×16
Industrial: 15-19.5
Three-Point Hitch
Category I
Control type Position control
Lift capacity (at ends) 871 kg (1,920 lbs)
PTO (Power take-off shaft)
Middle PTO type Live (hydro)
Middle PTO speed 2000 rpm
Rear PTO type Continuous live
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pressure 2133 psi (147.1 bar)
Pump flow 7.1 gpm (26.9 lpm)
Steering flow 5.1 gpm (19.3 lpm)
Total flow 12.2 gpm (46.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*