New Holland 8670

New Holland 8670The New Holland 8670 is a 2WD/4WD row-crop tractor from the 70 Genesis series. This tractor was manufactured by New Holland from 1993 to 2000. The New Holland 8670 is equipped with a 7.5 L (456.0 cu·in) six-cylinder diesel engine and a full power shift transmission with 16 forward and 9 reverse gears.

The NH 8670 row-crop tractor used the Ford engine. It is a 7.5 L, 7,472 cm2, (456.0 cu·in) six-cylinder turbocharged diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.5:1. This engine produced 172.4 PS (126.8 kW; 170.0 HP) at 2,100 rpm of output power.

The New Holland 8670 is equipped with hydrostatic power steering, wet disc brakes, Cab (standard) and 416.4 liters (110.0 US gal.; 91.6 Imp. gal) fuel tank.

New Holland 8670 Specifications

General Specifications
Model New Holland 8670
Length 4,990 mm (196.5 in)
Width 2,450 mm (96.5 in)
Height (cab) 3,080 mm (121.3 in)
Wheel base 3,000 mm (118.1 in)
Ground clearance Front axle: 500 mm (19.7 in)
Drawbar: 470 mm (18.5 in)
Weight (operating) 2WD: 7,165 kg (15,796 lbs)
4WD: 8,050 kg (17,747 lbs)
SuperSteer: 8,255 kg (18,200 lbs)
Fuel tank capacity 416.4 liters (110.0 US gal.; 91.6 Imp. gal)
Battery Two 12V, CCA 950A
Cabin type Cab (standard)
Engine
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.5 L, 7,472 cm2, (456.0 cu·in)
Bore and stroke 112.0 mm X 127.0 mm (4.41 in X 5 in)
Compression ratio 17.5:1
Horsepower 172.4 PS (126.8 kW; 170.0 HP) at 2,100 rpm
Starter Electric
Oil capacity: 20.8 L (22 US. qt, 18.3 Imp. qt.)
Coolant capacity: 25.0 L (26.4 US. qt, 22 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD (optional)
Steering type Hydrostatic power
Brakes Wet disc
Transmission model
Transmission type Full power shift
Gears 16 forward and 9 reverse
Speed Forward: 29.8 kmh (18.5 mph) Reverse: 13.4 kmh (8.3 mph)
Tires
Front tires Ag: 14L-16.1 (2WD), 16.9R28 (4WD)
Rear tires Ag: 18.4R42
Three-Point Hitch
Category III
Control type
Lift capacity (at ends) 4,535 kg (10,000 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed center load sensing (CCLS)
Hydraulic capacity 117.0 L (30.9 US. gal, 25.7 Imp. gal.)
Pressure 2750 psi (189.6 bar)
Valves 3
Pump flow 24.0 gpm (90.8 lpm)
Total flow 31.0 gpm (117.3 lpm)
MegaFlow (optional): 55.0 gpm (208.2 lpm)