The Kubota B2400 is a 4WD utility tractor from the B series. This tractor was manufactured by the Kubota from 1995 to 1999. The Kubota B2400 is equipped with a 1.1 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.
The Kubota B2400 utility tractor used the D1105-D10 engine. It is a 1.1 L, 1,123 cm2, (68.5 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 78.4 mm (3.09 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24 HP) of gross horsepower and 18.2 PS (13.4 KW; 18.0 HP).
The Kubota B2400 is equipped with integral type power steering, wet disk brakes, open operator station with two-post ROPS (rollover protection structure) and 24.0 liters (6.3 US gal.; 5.3 Imp. gal) fuel tank.
Following attachments are available for Kubota B2400 utility tractor:
- Mid-mount Kubota 54 inch (1,370 mm) mower deck
- Mid-mount Kubota 60 inch (1,520 mm) mower deck
- Front-mount Kubota B2650 50 inch (1,270 mm) snow blower
- Front-mount Kubota B2660 60 inch (1,520 mm) snow blower
- Kubota LA301 loader
- Kubota LA351 backhoe
Kubota B2400 Specifications
| General Specifications | |
| Model | Kubota B2400 |
| Length | 2,330 mm (91.7 in) |
| Width | 1,175 mm (46.3 in) |
| Height | 1,965 mm (77.4 in) |
| Wheel base | 1,500 mm (59.1 in) |
| Weight | 662 kg (1460 lbs) |
| Fuel tank capacity | 24.0 liters (6.3 US gal.; 5.3 Imp. gal) |
| Battery | 12V CCA: 390A |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | D1105-D10 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.1 L, 1,123 cm2, (68.5 cu·in) |
| Bore and stroke | 78.0 mm X 78.4 mm (3.07 in X 3.09 in) |
| Horsepower | 24.3 PS (17.9 kW; 24 HP) |
| Torque | 67.0 N·m (6.8 kg·m, 49.4 ft·lb) |
| Starter | Electric |
| Oil type | SAE 10W-30 |
| Oil capacity: | 3.0 L (3.17 US. qt, 2.64 Imp. qt.) |
| Coolant capacity: | 3.4 L (3.59 US. qt, 2.99 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Integral type power |
| Brakes | Wet disk |
| Front axle case | 3.7 L (3.9 US. qt, 3.3 Imp. qt.) |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 14.0 kmh (8.7 mph) Reverse: 14.0 (8.7 mph) |
| Transmission oil capacity | 12.0 L (12.7 US. qt, 10.6 Imp. qt.) |
| Tires | |
| Front tires | Ag: 7-12 |
| Rear tires | Ag: 11.2-16 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control |
| Lift capacity | 580 kg (1,280 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | – |
| Middle PTO spped | 2,537 rpm |
| Rear PTO type | Live |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 12.0 L (12.7 US. qt, 10.6 Imp. qt.) |
| Pump flow | 5.8 gpm (22.0 lpm) |