Kubota B7400

Kubota B7400The Kubota B7400 is a 4WD utility tractor from the B series. This tractor was manufactured by the Kubota from 2000 to 2003. The Kubota B7400 is equipped with a 0.7 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The Kubota B7400 utility tractor used the Kubota D722-E-D16 engine. It is a 0.7 L, 719 cm2, (43.9 cu·in) three-cylinder natural aspirated diesel engine with 67.0 mm (2.64 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke. This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 2,900 rpm of maximum output power. The D722-E-D16 indirect fuel injection system and dual paper element air cleaner.

The Kubota B7400 is equipped with manual steering, wet disc type brakes, open operator station with two-post ROPS (rollover protection structure) and 12.9 liters (3.4 US gal.; 2.8 Imp. gal) fuel tank.

Kubota B7400 Specifications

General Specifications
Model Kubota B7400
Length 2,280 mm (89.8 in)
Width 980 mm (38.6 in)
Height 1,910 mm (75.2 in)
Wheel base 1,490 mm (58.7 in)
Weight 585 kg (1288 lbs)
Fuel tank capacity 12.9 liters (3.4 US gal.; 2.8 Imp. gal)
Battery 12V, CCA: 390A
Cabin type Open operator station with two-post ROPS
Engine
Engine model Kubota D722-E-D16
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 0.7 L, 719 cm2, (43.9 cu·in)
Bore and stroke 67.0 mm X 68.0 mm (2.64 in X 2.68 in)
Horsepower 16.2 PS (11.9 kW; 16.0 HP) at 2,900 rpm
Starter Electric
Oil capacity: 2.4 L (2.54 US. qt, 2.11 Imp. qt.)
Coolant capacity: 2.7 L (2.85 US. qt, 2.38 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Manual
Brakes Wet disc type
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Transmission oil capacity 11.2 L (11.83 US. qt, 9.85 Imp. qt.)
Tires
Front tires Ag: 6-12
Rear tires Ag: 8.3-16
Three-Point Hitch
Caterogy I
Control type
Lift capacity 615 kg (1356 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO spped 2,500 rpm
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Total flow 3.9 gpm (14.8 lpm)