Kubota L2250

Kubota L2250The Kubota L2250 is a 2WD (L2250F) or 4WD (L2250DT) compact utility tractor from the L series. This tractor was manufactured by the Kubota from 1985 to 1990. The Kubota L2250 is equipped with a 1.3 L three-cylinder diesel engine and one of two transmissions: mechanical shuttle transmission with 8 forward and 7 reverse gears or partially synchronized transmission with 8 forward and 7 reverse gears.

The Kubota L2250 compact utility tractor used the Kubota D1302-DI-A engine. It is a 1.3 L, 1,299 cm2, (79.3 cu·in) three-cylinder natural aspirated diesel engine with 82.0 mm (3.23 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. This engine produced 26.9 PS (19.8 kW; 26.5 HP) at 2,600 rpm of maximum output power.

The Kubota L2250 is equipped with manual or power (option) steering, differential wet disc brakes, two-post ROPS (canopy was available as an option) and 29.0 liters (7.7 US gal.; 6.4 Imp. gal) fuel tank.

Following attachments are available for the Kubota L2250 compact utility tractor:

  • Mid-mount Kubota RC60-25 60 in (1,520 mm) with 3-blades
  • Mid-mount Kubota RC72-25 72 in (1,820 mm) with 3-blades
  • Rear-mount Kubota FL1021 tiller
  • Rear-mount Kubota FL1271 tiller
  • Kubota BF400G loader

Kubota L2250 Specifications

General Specifications
Model Kubota L2250
Length 2,750 mm (108.3 in)
Width 1,250 mm (49.2 in)
Height 2,020 mm (79.5 in)
Wheel base 1,640 mm (64.6 in)
Weight L2250F: 985 kg (2,170 lbs)
L2250DTF: 1,080 kg (2,380 lbs)
Fuel tank capacity 29.0 liters (7.7 US gal.; 6.4 Imp. gal)
Battery 12V, 80Ah
Cabin type Two-post ROPS with canopy (option)
Engine
Engine model Kubota D1302-DI-A
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,299 cm2, (79.3 cu·in)
Bore and stroke 82.0 mm X 82.0 mm (3.23 in X 3.23 in)
Compression ratio 18.0:1
Horsepower 26.9 PS (19.8 kW; 26.5 HP) at 2,600 rpm
Starter Electric
Oil capacity: 5.7 L (6 US. qt, 5 Imp. qt.)
Coolant capacity: 5.0 L (5.3 US. qt, 4.4 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual or power (option)
Brakes Differential wet disc
Differential lock Rear standard
Transmission model
Transmission type Mechanical shuttle
Gears 8 forward and 7 reverse
Speed Forward: 20.8 kmh (12.9 mph) Reverse: 13.2 (8.2 mph)
Transmission oil capacity 31.0 L (8.2 US. gal, 6.8 Imp. gal.)
Transmission model
Transmission type Partially synchronized
Gears 8 forward and 7 reverse
Speed Forward: 20.8 kmh (12.9 mph) Reverse: 13.2 (8.2 mph)
Transmission oil capacity 31.0 L (8.2 US. gal, 6.8 Imp. gal.)
Tires
Front tires Ag: 4.00-15 (2WD), 6-14 (4WD)
Rear tires Ag: 9.5-24
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends) 850 kg (1,875 lbs)
PTO (Power take-off shaft)
Middle PTO type Optional
Middle PTO spped 1,080/2,000 rpm
Rear PTO type Continuous or live (optional)
Rear PTO spped 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 31.0 L (32.76 US. qt, 27.28 Imp. qt.)
Pressure 2275 psi (156.9 bar)
Valves 1 to 3
Pump flow 6.7 gpm (25.4 lpm)
Steering flow 2.8 gpm (10.6 lpm)
Total flow 9.5 gpm (36 lpm)