The Kubota M62 is a 4WD backhoe loader tractor from the M series. This tractor has been manufactured by the Kubota in since 2016. The Kubota M62 is equipped with a 2.4 L four-cylinder turbocharged diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Kubota M62 backhoe loader tractor used the Kubota V2403 engine. It is a 2.4 L, 2,434 cm2, (148.5 cu·in) four-cylinder turbocharged diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. This engine produced 63 PS (46.3 kW; 62.0 HP) at 2,700 rpm of net horsepower and 46.6 PS (34.3 KW; 46.0 HP) of PTO output power.
The Kubota M62 is equipped with hydraulic type power steering, multiple wet disks brakes, four-post ROPS/FOPS and 67.0 liters (17.7 US gal.; 14.7 Imp. gal) fuel tank.
Following attachments are available for the Kubota M62 backhoe loader tractor:
- Kubota TL1800/TL1800V loader
- Kubota BT1400 backhoe
Kubota M62 Specifications
| General Specifications | |
| Model | Kubota M62 |
| Length (w/o 3P, loader, backhoe) | 3,159 mm (124.4 in) |
| Width (w/o loader) | 1,905 mm (75.0 in) |
| Height | 2,595 mm (102.2 in) |
| Wheel base | 2,050 mm (80.7 in) |
| Weight | 2,264 kg (4991 lbs) |
| Fuel tank capacity | 67.0 liters (17.7 US gal.; 14.7 Imp. gal) |
| Battery | 12V, CCA: 650A |
| Cabin type | Four-post ROPS/FOPS |
| Engine | |
| Engine model | Kubota V2403 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.4 L, 2,434 cm2, (148.5 cu·in) |
| Bore and stroke | 87.0 mm X 102.4 mm (3.43 in X 4.03 in) |
| Horsepower | 63 PS (46.3 kW; 62.1 HP) at 2,700 rpm |
| Starter | Electric |
| Oil capacity: | 9.4 L (9.93 US. qt, 8.27 Imp. qt.) |
| Coolant capacity: | 8.2 L (8.66 US. qt, 7.21 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydraulic type power |
| Brakes | Multiple wet disks |
| Differential | Bevel gear |
| Front axle case | 12.5 L (13.2 US.qts, 11.0 Imp. qts) |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Speed | Forward: 25.1 kmh (15.6 mph) Reverse: 24.7 (15.4 mph) |
| Transmission oil capacity | 46.0 L (12.2 US. gal, 10.1 Imp. gal.) |
| Tires | |
| Front tires | Industrial: 10-16.5 |
| Rear tires | Industrial: 17.5L-24 |
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | Position control |
| Lift capacity (at ends) | 1,268 kg (2,796 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Steering flow | 6.6 gpm (25 lpm) |
| Total flow | 39.0 gpm (147.6 lpm) |
Be the first to comment