Massey Ferguson 130

Massey Ferguson 130The Massey Ferguson 130 is a 2WD utility tractor manufactured by Massey Ferguson in France from 1966 to 1972. The Massey Ferguson 130 is equipped with a 1.8 L (107.0 cu·in) four-cylinder diesel engine and a transmission with 8 forward and 2 reverse gears.

The Massey Ferguson 130 utility tractor used the Perkins A4.107 engine. It is a 1.8 L, 1,753 cm2, (107.0 cu·in) four-cylinder natural aspirated diesel engine with 79.0 mm (3.11 in) of the cylinder bore and 89.0 mm (3.5 in) of the piston stroke. The compression ratio rating is 22.0:1. This engine produced 30.5 PS (22.4 kW; 30.0 HP) at 2,250 rpm of output power and 103.0 N·m (10.5 kg·m, 75.9 ft·lb) at 1,250 rpm of torque.

The MF 130 is equipped with manual steering, differential mechanical disc brakes, open operator station, and 45.5 liters (12 US gal.; 10 Imp. gal) fuel tank.

Massey Ferguson 130 Specifications

General Specifications
ModelMassey Ferguson 130
Length2,760 mm (108.7 in)
Width1,600 mm (63 in)
Height1,390 mm (54.7 in)
Wheel base
Ground clearance340 mm (13.4 in)
Weight1,455 kg (3,208 lbs)
Fuel tank capacity45.5 liters (12 US gal.; 10 Imp. gal)
Battery12V, 80Ah
Cabin typeOpen operator station
Engine
Engine modelPerkins A4-107
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement1.8 L, 1,753 cm2, (107.0 cu·in)
Bore and stroke79.0 mm X 89.0 mm (3.11 in X 3.5 in)
Compression ratio22.0:1
Horsepower30.5 PS (22.4 kW; 30.0 HP) at 2,250 rpm
Torque103.0 N·m (10.5 kg·m, 75.9 ft·lb) at 1,250 rpm
StarterElectric
Oil capacity:5.4 L (5.7 US. qt, 4.8 Imp. qt.)
Coolant capacity:6.7 L (7.1 US. qt, 5.9 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeManual
BrakesDifferential mechanical disc
Transmission model
Transmission type
Gears8 forward and 2 reverse
Transmission oil capacity4.8 L (1.3 US. gal, 1.1 Imp. gal.)
Tires
Front tiresAg: 5×16
Rear tiresAg: 10/12.4-28
Three-Point Hitch
CaterogyI
Control type
Lift capacity (at ends)1,010 kg (2,225 lbs)
PTO (Power take-off shaft)
Rear PTO typeLive
Rear PTO speed540 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity19.0 L (20.08 US. qt, 16.72 Imp. qt.)
Pressure1990 psi (137.2 bar)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*